- All
- Favorite
- Popular
- Most rated
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | STX-202B |
| Pricing | Upon Request |
| Power Supply | AC 220 V, 50 Hz, 10 A |
| Total Power Consumption | 120 W (excluding air compressor) |
| Frame Material | Aluminum Alloy with Sheet Metal Enclosure |
| Diamond Wire Length | ≤45 m |
| Diamond Wire Diameter | ≤0.45 mm |
| Wire Tensioning Method | Adjustable Pneumatic Tensioning |
| Spindle Motion | Reciprocating Rotation |
| Spindle Speed | 2–300 rpm (adjustable) |
| Z-Axis Travel | ≤60 mm |
| Y-Axis Travel | ≤50 mm |
| Sample Stage | Manual 2D Fixture — Horizontal Rotation: 0–360°, Tilt Angle: ±15° |
| Maximum Distance Between Guide Wheels (inner) | 96 mm |
| Max. Workpiece Dimensions | Φ50 × 50 mm |
| Specimen Holder Size (L×W×H) | 80 × 51 × 12 mm |
| Max. Cutting Depth | ≤50 mm |
| Control System | Integrated PLC + 7-inch Touchscreen HMI |
| Real-time Video Monitoring | Built-in 7-inch Display |
| Machine Dimensions (L×W×H) | 730 × 680 × 970 mm |
| Net Weight | 130 kg |
| Operating Environment | 0–45 °C, 10–85% RH (non-condensing) |
| Cooling Requirement | Cutting Oil (recommended) |
| Compressed Air Supply | ≥0.6 MPa |
| Minimum Bench Load Capacity | 150 kg |
| Recommended Bench | Solid Cement Table (800 × 700 × 500 mm) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SE-VE |
| Pricing | Available Upon Request |
| Light Source Range | 400–800 nm (Visible to Near-Infrared) |
| Measurement Mode | Fixed-Angle (65° incidence) |
| Data Acquisition | PCRSA configuration with rotating compensator |
| Output Spectra | Ψ/Δ, n/k/s, R |
| Single-Measurement Duration | 0.5–5 s |
| Thickness Repeatability | ±0.05 nm |
| Spot Size | 1–3 mm (adjustable) |
| Focus Adjustment | Manual |
| Sample Max Diameter | 160 mm |
| Mapping Capability | Not Supported |
| Optional Accessories | Temperature-Controlled Stage, Vacuum Pump, Transmission Adsorption Module |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZJ-52T |
| Pricing | Available Upon Request |
| Measurement Range | 1×10⁵ to 1×10⁻¹ Pa |
| Filament Material | Tungsten |
| Cold Filament Resistance | 86.5 ± 1.7 Ω at 23 ± 3 °C |
| Operating Filament Temperature | 40–300 °C |
| Zero Drift | ≤ ±25% (within 3×10³–1×10⁻¹ Pa) |
| Vacuum Port Options | Φ15.5±0.5 mm Glass Seal (max bakeout: 80 °C) |
| Φ15.5±0.1 mm Metal Seal (max bakeout | 80 °C) |
| KF10/KF16/KF25/KF40 Quick-Release Flanges (max bakeout | 80 °C) |
| CF16/CF25/CF35 Conflat Flanges (max bakeout | 450 °C) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Low-Speed Metallographic Cutting Machine |
| Model | SYJ-100D |
| Power Supply | 220 V, 50 Hz |
| Rotational Speed Range | 1–190 rpm |
| Feed Rate | 0.05–40 mm/min |
| Z-Axis Travel | 1–100 mm |
| Z-Axis Return Speed | 1–100 mm/min |
| Maximum Workpiece Dimensions | 100 × 100 × 100 mm (cube) or Ø100 mm (cylinder) |
| Dimensions (W × D × H) | 800 × 800 × 700 mm |
| Net Weight | ~115 kg |
| Brand | KJ GROUP (Shenyang Kejing) |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZJ-51 |
| Measurement Range | 6.5×10¹–1×10⁻¹ Pa |
| Heating Current | 90–130 mA |
| Cold Filament Resistance | 7 ± 1 Ω @ 23 ± 3 °C |
| Operating Filament Temperature | 40–150 °C |
| Accuracy | ±15% of reading |
| Electrical Interface | Thermocouple Output (Type T or K, unamplified) |
| Mechanical Interface | φ15.5 mm Glass Flange (Max. Bakeout Temp: 80 °C) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HP-100 |
| Heating Plate Material | Cr12MoV Tool Steel |
| Max Operating Temperature | 500 °C (<30 min) |
| Continuous Operating Temperature | 450 °C (with water cooling) |
| Max Applied Pressure (heated) | 12 Ton (20 MPa gauge reading) |
| Heating Plate Dimensions | 90 mm × 90 mm |
| Temperature Control Precision | ±1 °C |
| Programmable Ramp/Soak | 30-segment |
| Cooling | Integrated 1/4" BSP water-cooling ports |
| Power Supply | Single-phase AC 208–240 V, 50/60 Hz |
| Max Power Consumption | 1.6 kW |
| Max Stroke | 50 mm |
| Unit Weight | 60 kg |
| Optional Accessory | External Chiller Unit |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SYJ-1000 |
| Price | Upon Request |
| Power Supply | AC 220 V, 50 Hz |
| Main Spindle Speed Range | 50–1500 rpm (infinitely variable) |
| Maximum Cutting Depth | ≈50 mm |
| Feed Positioning Accuracy | 0.01 mm |
| Dimensions (W×D×H) | 410 × 330 × 290 mm |
| Weight | 39 kg |
| Standard Blade | Ø150 mm (with arbor sizes Ø12.7 mm, blade thickness 0.6 mm) |
| Compatible Blade Diameters | Ø100 mm, Ø150 mm, Ø200 mm |
| Cooling System | Integrated recirculating water reservoir with splash-fed coolant delivery |
| Operating Environment | 10–40 °C, 45–65 % RH |
| Required Workbench | ≥600 × 600 × 700 mm, load capacity ≥50 kg |
| Safety Features | Mechanical cutting limit stop, blade guard, emergency stop circuit |
| Compliance | Designed to meet general laboratory safety standards per IEC 61010-1 |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | KSL-1500X-S |
| Max Operating Temperature | 1450 °C (continuous ≤1400 °C) |
| Temperature Uniformity | ±1 °C |
| Power Supply | AC 220 V, 50 Hz, 2 kW |
| Heating Rate | 10 °C/min (to max temp) |
| Heating Element | Silicon Carbide (SiC) Rods |
| Chamber Dimensions | 120 mm × 120 mm × 120 mm (1.73 L nominal volume) |
| Thermocouple Type | S-type (Platinum–10% Rhodium / Platinum) |
| Control System | PID-based 30-segment programmable controller |
| Certification | CE compliant |
| External Dimensions | 380 mm × 410 mm × 620 mm |
| Net Weight | 40 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1700X-A2 |
| Maximum Operating Temperature | ≤1700 °C continuous, 1650 °C rated |
| Temperature Uniformity | ±1 °C |
| Power Supply | AC 220 V, 50 Hz, 5.2 kW |
| Heating Rate | 10 °C/min (to max temp) |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Chamber Dimensions | 200 mm × 200 mm × 200 mm (8 L) |
| Door Type | Side-opening |
| Thermocouple | Type B Dual Platinum-Rhodium (PtRh30/PtRh6) |
| Controller | PID-based 30-segment programmable temperature controller |
| Certification | CE compliant |
| External Dimensions | 600 mm × 650 mm × 560 mm |
| Net Weight | 140 kg |
| Brand | KYKY (KJ GROUP) |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model Series | FF-40/25, FF-63/80, FF-100/150, FF-100/300, FF-160/700, FF-200/1300, F-250/2000 |
| Pricing | Available Upon Request |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-USP-04C |
| Price | Upon Request |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power | 100 W |
| X/Y Travel Range | 1–200 mm |
| X-Axis Speed | 10–800 mm/s |
| Y-Axis Speed | 10–100 mm/s |
| Droplet Size | 10–20 µm |
| Flow Rate | 0.6 pL/min – 4 mL/min |
| Max Substrate Temperature | 500 °C |
| Heater Platform Dimensions | 350 mm × 220 mm |
| Z-Axis Adjustment Range | 0–60 mm |
| Syringe Capacity | 20 mL |
| Syringe Diameter Limit | ≤ Ø30 mm |
| Syringe Drive Speed | 0.1–45 mm/min (fine adjustment: 0.01–8 mm/min) |
| Syringe Stroke Range | 0.001–120 mm |
| Max Solid Content | ≤ 10 wt% |
| Max Viscosity | ≤ 100 cP |
| Nozzle-to-Substrate Distance | 1–100 mm |
| Footprint | ≥ 2 m² |
| Operating Altitude | ≤ 1000 m |
| Ambient Temp | 25 °C ± 15 °C |
| Relative Humidity | 55 %RH ± 10 %RH |
| Power Supply | AC 220 V, 50/60 Hz, Grounded |
| Pneumatic Requirement | Compressed Air or Gas Cylinder with Regulator |
| Brand | KJ GROUP (Shenyang Kejing) |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | FH-36 |
| Pricing | Upon Request |
| Power Input | 220 V, 50/60 Hz, Single-Phase |
| Cabinet Construction | Steel Frame with Tempered Glass Sliding Sash |
| Airflow System | Ducted, Fan-Driven |
| Blower | Explosion-Proof Centrifugal Fan |
| Airflow Rate | 1900 m³/h |
| Static Pressure | 190 Pa |
| Blower Power | 180 W, 208–240 VAC |
| Lighting | 30 W Airtight Explosion-Proof LED Lamp |
| Control Interface | Touchscreen Panel with Dedicated Push-Button Controls |
| Internal Power Outlets | Two 10-A, 250-V AC Socket Ports |
| Internal Power Supply | Dual Switching Mode Power Supplies (SMPs) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | KJ-MSR800 |
| Coating Materials | PET, Nonwoven Fabric |
| Substrate Thickness | 125–300 µm |
| Effective Coating Width | ≤800 mm |
| Max Winding Diameter | Φ400 mm |
| Mandrel ID | 4 inches |
| Web Speed | 1–2 m/min |
| Web Tension Range | 30–200 N |
| Tension Control | AC Servo System |
| Sputtering Configuration | Single-Side |
| Base Vacuum (Empty, Clean) | ≤8×10⁻⁴ Pa |
| Pump-Down Time (10⁵ Pa → 5×10⁻³ Pa) | ≤60 min |
| System Leak Rate | ≤1.0×10⁻¹⁰ Pa·m³/s |
| Magnetron Cathodes | 3 units |
| Thickness Uniformity | ≤±10% |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZJ-53B |
| Pricing | Available Upon Request |
| Measurement Range | 4×10²–1×10⁻¹ Pa |
| Heating Current | 28 ± 1.5 mA |
| Cold Filament Resistance | 9.5 ± 1 Ω @ 23 ± 3 °C |
| Filament Operating Temperature | 40–150 °C |
| Output Scatter | ≤ ±20 % |
| Vacuum Port | Φ15 ± 0.5 mm Glass Seal |
| Maximum Bakeout Temperature | 80 °C |
| Brand | KJ GROUP |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GSL-1700X-III |
| Power Supply | AC 220 V, 50/60 Hz, 9 kW (requires 75 A circuit breaker) |
| Max Operating Temperature | 1700 °C (central zone), 1400 °C (side zones) |
| Heating Zones | 3 independent PID-controlled zones |
| Programmable Ramp/Soak | 30-segment |
| Tube Dimensions | Φ60 mm OD × Φ54 mm ID × 1200 mm L |
| Hot Zone Length | 630 mm (Zone I: 190 mm |
| Zone II | 250 mm |
| Zone III | 190 mm) |
| Heating Elements | Zone I & III — U-shaped SiC rods (4 each) |
| Thermocouples | 1 × B-type, 2 × S-type |
| Temperature Uniformity | ±1 °C |
| Max Ramp Rate | 20 °C/min (Zones I & III), 10 °C/min (Zone II) |
| Chamber Material | High-purity alumina fiber |
| Insulation | Dual-layer shell with forced-air cooling |
| Surface Temp | <60 °C |
| Certifications | CE compliant |
| Dimensions (W×D×H) | 860 × 460 × 720 mm |
| Weight | 150 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GSL-1700X-80VT |
| Heating Element | U-shaped MoSi₂ rods |
| Max Temperature | 1700 °C (≤1 h), Continuous Range: 800–1600 °C |
| Control Accuracy | ±1 °C |
| Temperature Program | 30-segment PID |
| Heating Zone Length | 150 mm |
| Uniform Zone Length | 50 mm |
| Tube Dimensions | 80 mm OD × 72 mm ID × 800 mm L (Al₂O₃ ceramic) |
| Power Supply | AC 220 V, 50/60 Hz, 4 kW |
| External Dimensions | 490 × 490 × 1130 mm |
| Weight | 150 kg |
| Safety Certification | CE-compliant |
| Cooling | Dual-layer housing with forced-air circulation |
| Surface Temp | <60 °C |
| Thermocouple Type | B-type (Pt/Rh) |
| Vacuum/Atmosphere Compatibility | Yes (with optional gas fittings) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SYJ-40 |
| Instrument Type | Abrasive Wheel Cutting Machine |
| Power Supply | AC 100–240 V, 50/60 Hz, 10 A (with DC24V/11.67A adapter) |
| Total Power Consumption | 100 W |
| Motor | DC24V, 90 W, 5.2 A, max 2500 rpm |
| Effective Spindle Speed Range | 650–2500 rpm |
| Blade Diameter | Ø100 mm |
| Maximum Sample Cross-Section | 25 mm × 40 mm |
| Dimensions (L×W×H) | 390 × 285 × 290 mm |
| Weight | 7 kg |
| Operating Environment | 0–45 °C, 10–85% RH (non-condensing) |
| Safety Compliance | Grounded three-pin AC input required |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GSL-1700X |
| Heating Element | 1700°C-rated Molybdenum Disilicide (MoSi₂) Rods |
| Max Temperature | 1700°C (≤2 h), Continuous Operation at 1650°C |
| Heating Zone Length | 457 mm |
| Uniform Zone Length | 150 mm |
| Temperature Control Accuracy | ±1°C |
| Thermocouple Type | Type B (Platinum/Rhodium) |
| Vacuum Level | ≤1×10⁻² Torr (with dual-stage rotary vane pump) |
| Power Supply | AC 220 V, 50/60 Hz, 5.2 kW (30 A circuit breaker required) |
| Alumina Tube Dimensions | Ø60 mm OD / Ø54 mm ID × 1000 mm L or Ø80 mm OD / Ø74 mm ID × 1000 mm L |
| External Dimensions | 590 × 490 × 740 mm |
| Net Weight | 150 kg |
| Cooling | Dual-layer shell with forced-air cooling |
| Insulation | High-purity alumina fiber |
| Temperature Programming | 30-segment PID controller |
| Safety Certification | CE-compliant |
| Surface Temperature | <55°C under full load |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | MSK-SFM-13S |
| Instrument Type | Planetary Ball Mill |
| Sample Applicability | Hard and brittle materials |
| Feed Size | <10 mm (brittle), <3 mm (other materials) |
| Output Particle Size | Wet grinding: avg. particle size <1 µm |
| Dry grinding | avg. particle size <20 µm |
| Batch Capacity | 160 mL |
| Operating Voltage | 208–240 V AC, single-phase, 50/60 Hz |
| Power Consumption | ≤550 W |
| Revolution Speed | 50–400 rpm (adjustable) |
| Rotation Speed | 100–800 rpm (adjustable) |
| Speed Ratio | Revolution : Rotation = 1 : 2 |
| Programmable Stages | 10 stored programs |
| Speed Control | 5-step digital speed regulation |
| Direction Control | Clockwise / Counterclockwise selectable |
| Dimensions (L×W×H) | 500 × 350 × 330 mm |
| Net Weight | 60 kg |
| Transport Dimensions | 762 × 711 × 660 mm (30″ × 28″ × 26″) |
| Shipping Weight | 90 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SYU-3 |
| Price | Upon Request |
| Operating Frequency | 38 kHz |
| Maximum Sample Load | 1 kg |
| Total Current Draw | ≤0.6 A |
| Motor Speed | 1400 RPM |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Included Sieves | 100, 200, and 450 mesh (ID 200 mm × H 50 mm) |
| System Dimensions | 360 × 300 × 740 mm |
| Ultrasonic Generator Dimensions | 350 × 300 × 200 mm |
| Brand | KJ GROUP |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Box-Type Muffle Furnace |
| Model | KSL-1400X-A1 |
| Max Temperature | 1400 °C (continuous operation ≤1300 °C) |
| Temperature Control Accuracy | ±1 °C |
| Power Supply | AC 220 V, 50 Hz, 3 kW |
| Heating Rate (to max temp) | 10 °C/min |
| Heating Element | Silicon Carbide (SiC) Rods |
| Internal Chamber Dimensions | 150 mm × 150 mm × 150 mm (3.4 L) |
| Chamber Lining | High-Purity Polycrystalline Alumina Fiber with Imported Al₂O₃ Reflective Coating |
| Temperature Sensor | S-Type Single Platinum-Rhodium Thermocouple (PtRh10–Pt) |
| Controller | PID-Based Programmable Temperature Controller (30-Stage Ramp/Soak Profiles) |
| Certification | CE Compliant |
| External Dimensions | 500 mm × 490 mm × 700 mm |
| Net Weight | 120 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | STX-605B |
| Pricing | Upon Request |
| Wire Length | 150 m |
| Maximum Sample Diameter | Φ150 mm |
| Max Sample Weight | 3 kg |
| Wire Speed | 0–5 m/s |
| Z-Axis Travel | ≤160 mm |
| Y-Axis Travel | ≤180 mm |
| Pneumatic Tension Range | 0.1–0.4 MPa |
| Diamond Wire Diameter Compatibility | <0.45 mm |
| Electric Rotary Stage | 0–360°, Repeatability ±0.02° |
| Electric Tilting Stage | ±10°, Repeatability ±450″ |
| Ambient Operating Conditions | Altitude <1000 m, Temp. 25°C ±15°C, RH 55% ±10%, AC220V/50Hz, Compressed Air (0–1 MPa), Ventilation Required |
| Dimensions (W×D×H) | 617×620×1500 mm |
| Net Weight | 183 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | STX-610B |
| Instrument Type | Precision Diamond Wire Saw |
| Total Power | 500 W |
| Diamond Wire Length | ≤150 m |
| Wire Diameter | φ0.25–0.45 mm |
| Wire Tensioning | Adjustable Pneumatic Tension (0.1–0.4 MPa) |
| Cutting Mode | Reciprocating Rotation |
| Wire Speed | 0–8 m/s (adjustable) |
| Y-Axis Travel | ≤180 mm |
| Z-Axis Travel | ≤160 mm |
| Positioning Resolution (Y/Z) | 0.01 mm |
| Sample Mounting Stage | Manual 2D Rotary Table (0–360° horizontal, ±10° tilt) |
| Max Sample Size | Φ150 mm × 150 mm |
| Max Load Capacity | ≤5 kg |
| Guide Wheel Spacing (inner) | ≤180 mm |
| Control System | PLC + 7-inch Touchscreen HMI |
| Safety Features | Over-travel protection (spool, Y/Z axes), wire-break auto-stop, emergency stop switch |
| Frame Material | Aluminum Extrusion + Acrylic Transparent Enclosure |
| Dimensions (L×W×H) | 780 × 900 × 1580 mm |
| Net Weight | ≈225 kg |
| Power Supply | AC 220 V, 50 Hz, 10 A (with grounding) |
| Operating Environment | 0–45 °C, 10–85 % RH (non-condensing) |
| coolant (recommended | dedicated cutting oil) required |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | MSK-AFA-III |
| Power Supply | AC 220 V, 50 Hz |
| Total Power | 1100 W |
| Coating Speed | 10–100 mm/s (adjustable) |
| Coating Stroke | 10–250 mm (adjustable) |
| Vacuum Platen Dimensions | 360 × 200 mm |
| Effective Vacuum Area | 300 × 150 mm |
| Max Heating Temperature | 120 °C |
| Temperature Control Accuracy | ±2 °C |
| Adjustable Doctor Blade | 150 mm, micrometer-adjustable (0.01–5 mm range) |
| Film Thickness Repeatability | ±0.01 mm |
| Overall Dimensions (Closed) | 600 × 400 × 380 mm |
| Weight | 50 kg |
Show next