- All
- Favorite
- Popular
- Most rated
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SE-VE |
| Pricing | Available Upon Request |
| Light Source Range | 400–800 nm (Visible to Near-Infrared) |
| Measurement Mode | Fixed-Angle (65° incidence) |
| Data Acquisition | PCRSA configuration with rotating compensator |
| Output Spectra | Ψ/Δ, n/k/s, R |
| Single-Measurement Duration | 0.5–5 s |
| Thickness Repeatability | ±0.05 nm |
| Spot Size | 1–3 mm (adjustable) |
| Focus Adjustment | Manual |
| Sample Max Diameter | 160 mm |
| Mapping Capability | Not Supported |
| Optional Accessories | Temperature-Controlled Stage, Vacuum Pump, Transmission Adsorption Module |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZJ-52T |
| Pricing | Available Upon Request |
| Measurement Range | 1×10⁵ to 1×10⁻¹ Pa |
| Filament Material | Tungsten |
| Cold Filament Resistance | 86.5 ± 1.7 Ω at 23 ± 3 °C |
| Operating Filament Temperature | 40–300 °C |
| Zero Drift | ≤ ±25% (within 3×10³–1×10⁻¹ Pa) |
| Vacuum Port Options | Φ15.5±0.5 mm Glass Seal (max bakeout: 80 °C) |
| Φ15.5±0.1 mm Metal Seal (max bakeout | 80 °C) |
| KF10/KF16/KF25/KF40 Quick-Release Flanges (max bakeout | 80 °C) |
| CF16/CF25/CF35 Conflat Flanges (max bakeout | 450 °C) |
| Brand | KJ GROUP (Shenyang Kejing) |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZJ-51 |
| Measurement Range | 6.5×10¹–1×10⁻¹ Pa |
| Heating Current | 90–130 mA |
| Cold Filament Resistance | 7 ± 1 Ω @ 23 ± 3 °C |
| Operating Filament Temperature | 40–150 °C |
| Accuracy | ±15% of reading |
| Electrical Interface | Thermocouple Output (Type T or K, unamplified) |
| Mechanical Interface | φ15.5 mm Glass Flange (Max. Bakeout Temp: 80 °C) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HP-100 |
| Heating Plate Material | Cr12MoV Tool Steel |
| Max Operating Temperature | 500 °C (<30 min) |
| Continuous Operating Temperature | 450 °C (with water cooling) |
| Max Applied Pressure (heated) | 12 Ton (20 MPa gauge reading) |
| Heating Plate Dimensions | 90 mm × 90 mm |
| Temperature Control Precision | ±1 °C |
| Programmable Ramp/Soak | 30-segment |
| Cooling | Integrated 1/4" BSP water-cooling ports |
| Power Supply | Single-phase AC 208–240 V, 50/60 Hz |
| Max Power Consumption | 1.6 kW |
| Max Stroke | 50 mm |
| Unit Weight | 60 kg |
| Optional Accessory | External Chiller Unit |
| Brand | KYKY (KJ GROUP) |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model Series | FF-40/25, FF-63/80, FF-100/150, FF-100/300, FF-160/700, FF-200/1300, F-250/2000 |
| Pricing | Available Upon Request |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-USP-04C |
| Price | Upon Request |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power | 100 W |
| X/Y Travel Range | 1–200 mm |
| X-Axis Speed | 10–800 mm/s |
| Y-Axis Speed | 10–100 mm/s |
| Droplet Size | 10–20 µm |
| Flow Rate | 0.6 pL/min – 4 mL/min |
| Max Substrate Temperature | 500 °C |
| Heater Platform Dimensions | 350 mm × 220 mm |
| Z-Axis Adjustment Range | 0–60 mm |
| Syringe Capacity | 20 mL |
| Syringe Diameter Limit | ≤ Ø30 mm |
| Syringe Drive Speed | 0.1–45 mm/min (fine adjustment: 0.01–8 mm/min) |
| Syringe Stroke Range | 0.001–120 mm |
| Max Solid Content | ≤ 10 wt% |
| Max Viscosity | ≤ 100 cP |
| Nozzle-to-Substrate Distance | 1–100 mm |
| Footprint | ≥ 2 m² |
| Operating Altitude | ≤ 1000 m |
| Ambient Temp | 25 °C ± 15 °C |
| Relative Humidity | 55 %RH ± 10 %RH |
| Power Supply | AC 220 V, 50/60 Hz, Grounded |
| Pneumatic Requirement | Compressed Air or Gas Cylinder with Regulator |
| Brand | KJ GROUP (Shenyang Kejing) |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | FH-36 |
| Pricing | Upon Request |
| Power Input | 220 V, 50/60 Hz, Single-Phase |
| Cabinet Construction | Steel Frame with Tempered Glass Sliding Sash |
| Airflow System | Ducted, Fan-Driven |
| Blower | Explosion-Proof Centrifugal Fan |
| Airflow Rate | 1900 m³/h |
| Static Pressure | 190 Pa |
| Blower Power | 180 W, 208–240 VAC |
| Lighting | 30 W Airtight Explosion-Proof LED Lamp |
| Control Interface | Touchscreen Panel with Dedicated Push-Button Controls |
| Internal Power Outlets | Two 10-A, 250-V AC Socket Ports |
| Internal Power Supply | Dual Switching Mode Power Supplies (SMPs) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | KJ-MSR800 |
| Coating Materials | PET, Nonwoven Fabric |
| Substrate Thickness | 125–300 µm |
| Effective Coating Width | ≤800 mm |
| Max Winding Diameter | Φ400 mm |
| Mandrel ID | 4 inches |
| Web Speed | 1–2 m/min |
| Web Tension Range | 30–200 N |
| Tension Control | AC Servo System |
| Sputtering Configuration | Single-Side |
| Base Vacuum (Empty, Clean) | ≤8×10⁻⁴ Pa |
| Pump-Down Time (10⁵ Pa → 5×10⁻³ Pa) | ≤60 min |
| System Leak Rate | ≤1.0×10⁻¹⁰ Pa·m³/s |
| Magnetron Cathodes | 3 units |
| Thickness Uniformity | ≤±10% |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZJ-53B |
| Pricing | Available Upon Request |
| Measurement Range | 4×10²–1×10⁻¹ Pa |
| Heating Current | 28 ± 1.5 mA |
| Cold Filament Resistance | 9.5 ± 1 Ω @ 23 ± 3 °C |
| Filament Operating Temperature | 40–150 °C |
| Output Scatter | ≤ ±20 % |
| Vacuum Port | Φ15 ± 0.5 mm Glass Seal |
| Maximum Bakeout Temperature | 80 °C |
| Brand | KJ GROUP |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GSL-1700X-III |
| Power Supply | AC 220 V, 50/60 Hz, 9 kW (requires 75 A circuit breaker) |
| Max Operating Temperature | 1700 °C (central zone), 1400 °C (side zones) |
| Heating Zones | 3 independent PID-controlled zones |
| Programmable Ramp/Soak | 30-segment |
| Tube Dimensions | Φ60 mm OD × Φ54 mm ID × 1200 mm L |
| Hot Zone Length | 630 mm (Zone I: 190 mm |
| Zone II | 250 mm |
| Zone III | 190 mm) |
| Heating Elements | Zone I & III — U-shaped SiC rods (4 each) |
| Thermocouples | 1 × B-type, 2 × S-type |
| Temperature Uniformity | ±1 °C |
| Max Ramp Rate | 20 °C/min (Zones I & III), 10 °C/min (Zone II) |
| Chamber Material | High-purity alumina fiber |
| Insulation | Dual-layer shell with forced-air cooling |
| Surface Temp | <60 °C |
| Certifications | CE compliant |
| Dimensions (W×D×H) | 860 × 460 × 720 mm |
| Weight | 150 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GSL-1700X-80VT |
| Heating Element | U-shaped MoSi₂ rods |
| Max Temperature | 1700 °C (≤1 h), Continuous Range: 800–1600 °C |
| Control Accuracy | ±1 °C |
| Temperature Program | 30-segment PID |
| Heating Zone Length | 150 mm |
| Uniform Zone Length | 50 mm |
| Tube Dimensions | 80 mm OD × 72 mm ID × 800 mm L (Al₂O₃ ceramic) |
| Power Supply | AC 220 V, 50/60 Hz, 4 kW |
| External Dimensions | 490 × 490 × 1130 mm |
| Weight | 150 kg |
| Safety Certification | CE-compliant |
| Cooling | Dual-layer housing with forced-air circulation |
| Surface Temp | <60 °C |
| Thermocouple Type | B-type (Pt/Rh) |
| Vacuum/Atmosphere Compatibility | Yes (with optional gas fittings) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GSL-1700X |
| Heating Element | 1700°C-rated Molybdenum Disilicide (MoSi₂) Rods |
| Max Temperature | 1700°C (≤2 h), Continuous Operation at 1650°C |
| Heating Zone Length | 457 mm |
| Uniform Zone Length | 150 mm |
| Temperature Control Accuracy | ±1°C |
| Thermocouple Type | Type B (Platinum/Rhodium) |
| Vacuum Level | ≤1×10⁻² Torr (with dual-stage rotary vane pump) |
| Power Supply | AC 220 V, 50/60 Hz, 5.2 kW (30 A circuit breaker required) |
| Alumina Tube Dimensions | Ø60 mm OD / Ø54 mm ID × 1000 mm L or Ø80 mm OD / Ø74 mm ID × 1000 mm L |
| External Dimensions | 590 × 490 × 740 mm |
| Net Weight | 150 kg |
| Cooling | Dual-layer shell with forced-air cooling |
| Insulation | High-purity alumina fiber |
| Temperature Programming | 30-segment PID controller |
| Safety Certification | CE-compliant |
| Surface Temperature | <55°C under full load |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SYU-3 |
| Price | Upon Request |
| Operating Frequency | 38 kHz |
| Maximum Sample Load | 1 kg |
| Total Current Draw | ≤0.6 A |
| Motor Speed | 1400 RPM |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Included Sieves | 100, 200, and 450 mesh (ID 200 mm × H 50 mm) |
| System Dimensions | 360 × 300 × 740 mm |
| Ultrasonic Generator Dimensions | 350 × 300 × 200 mm |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | STX-605B |
| Pricing | Upon Request |
| Wire Length | 150 m |
| Maximum Sample Diameter | Φ150 mm |
| Max Sample Weight | 3 kg |
| Wire Speed | 0–5 m/s |
| Z-Axis Travel | ≤160 mm |
| Y-Axis Travel | ≤180 mm |
| Pneumatic Tension Range | 0.1–0.4 MPa |
| Diamond Wire Diameter Compatibility | <0.45 mm |
| Electric Rotary Stage | 0–360°, Repeatability ±0.02° |
| Electric Tilting Stage | ±10°, Repeatability ±450″ |
| Ambient Operating Conditions | Altitude <1000 m, Temp. 25°C ±15°C, RH 55% ±10%, AC220V/50Hz, Compressed Air (0–1 MPa), Ventilation Required |
| Dimensions (W×D×H) | 617×620×1500 mm |
| Net Weight | 183 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | MSK-AFA-III |
| Power Supply | AC 220 V, 50 Hz |
| Total Power | 1100 W |
| Coating Speed | 10–100 mm/s (adjustable) |
| Coating Stroke | 10–250 mm (adjustable) |
| Vacuum Platen Dimensions | 360 × 200 mm |
| Effective Vacuum Area | 300 × 150 mm |
| Max Heating Temperature | 120 °C |
| Temperature Control Accuracy | ±2 °C |
| Adjustable Doctor Blade | 150 mm, micrometer-adjustable (0.01–5 mm range) |
| Film Thickness Repeatability | ±0.01 mm |
| Overall Dimensions (Closed) | 600 × 400 × 380 mm |
| Weight | 50 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Model | GSL-1600X-III |
| Power Supply | AC 220 V, 50/60 Hz, 4 kW |
| Max Temperature | 1400 °C (Zone I), 1600 °C (Zone II), 1400 °C (Zone III) |
| Working Temperature | 1300 °C (Zone I), 1500 °C (Zone II), 1300 °C (Zone III) |
| Control Accuracy | ±1 °C |
| Tube Dimensions | Ø60 mm / Ø80 mm × 1200 mm (Al₂O₃ ceramic) |
| Furnace Dimensions | 860 × 470 × 720 mm |
| Weight | 150 kg |
| Heating Elements | SiC rods (Zones I & III), MoSi₂ rods (Zone II) |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GSL-1800X-ZF4 |
| Vacuum Chamber | Ø300 mm × 400 mm (stainless steel, electropolished interior) |
| Base Pressure | ≤8.0×10⁻⁵ Pa |
| Ultimate Vacuum | ≤8.0×10⁻⁴ Pa |
| Leak Rate | ≤6.7×10⁻⁸ Pa·L/s |
| Evaporation Source | 4 independent tungsten boat heaters |
| Max Evaporation Current | 200 A |
| Evaporation Voltage Range | AC 0–8 V (continuously adjustable) |
| Sample Stage | Ø120 mm, top-mounted, heated (RT–500 °C, PID-controlled) |
| Substrate-to-Source Distance | 140–200 mm |
| Film Thickness Resolution (Al) | 0.1 Å |
| Cooling Water Flow | 15 L/min |
| Power Input | AC 220 V, 50/60 Hz, <2.16 kW (excl. pumps) |
| Dimensions (W×D×H) | 900 × 1100 × 1800 mm |
| Weight | 230 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MSK-SFM-ALO |
| Price | Upon Request |
| Power Supply | 220 V, 50 Hz |
| Motor Power | 550 W |
| Crushing Speed | 500 rpm |
| Max Feed Size | 5–20 mm |
| Adjustable Jaw Gap Range | 0.01–5.00 mm (digital micrometer display, 0.01 mm resolution) |
| Feed Opening | 92 × 38 mm |
| Max Single Feed Capacity | 200 g |
| Output Particle Size | 0.5–2 mm (material-dependent) |
| Drawer Load Capacity | 200 g |
| Dimensions (Operational) | 400 × 640 × 870 mm (L×W×H) |
| Dimensions (Closed) | 400 × 600 × 500 mm (L×W×H) |
| Net Weight | ~59 kg |
| Jaw Liner Material | High-purity alumina ceramic (99.5% Al₂O₃) |
| Max Material Hardness Tolerance | <8 HRC |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PTL-6P |
| Pricing | Upon Request |
| Certification | CE Certified |
| Power Supply | AC 220 V, 50 Hz, 100 W |
| Operating Environment | Altitude < 1000 m, Temperature 10–40 °C, Relative Humidity 45–65 % RH |
| Dimensions (W×D×H) | 260 × 340 × 420 mm |
| Weight | 15 kg |
| Sample Holder Dimensions | 75 × 25 × 2 mm |
| Immersion Length | 60 mm |
| Travel Stroke | 1–80 mm |
| Dip Speed (Auto) | 1–400 mm/min |
| Dip Speed (Manual) | 1–150 mm/min |
| Immersion/Drying Time Range | 1–999 s |
| Dip Cycles | 1–45 |
| Stirring | Independent on/off control per station, dual-speed (low/high) |
| Dip Vessel Capacity | 150 mL × 6 |
| Footprint Requirement | ≥ 500 × 800 mm, Load Capacity ≥ 50 kg |
| Grounding | Mandatory |
| Ventilation | Not required |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | OTF-1200X-80SL |
| Power Supply | 208–240 V AC, 50/60 Hz, 2.5 kW |
| Max Operating Temperature | 1200 °C (≤1 h), Continuous Use: 1100 °C |
| Heating Zone Length | 440 mm |
| Uniform Temperature Zone | 120 mm |
| Quartz Tube Dimensions | Ø80 mm OD × Ø75 mm ID × 1400 mm L |
| Control Accuracy | ±1 °C |
| Cooling/Heating Rates | Up to 15 °C/s (low-temp range), down to 0.5 °C/s (high-temp range) |
| Vacuum Level | 10⁻³ Torr (mechanical pump), 10⁻⁵ Torr (turbo-molecular pump) |
| Thermocouples | Dual K-type (furnace wall + internal sample zone) |
| Sliding Rail Length | 1200 mm |
| Net Weight | 80 kg |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | OTF-1200X-HVHP-80 |
| Power Supply | AC 220 V, 50/60 Hz, 2.5 kW |
| Max Operating Temperature | 800 °C |
| Max Pressure Rating | 105 PSI (7 bar) at 800 °C |
| Heating Zone Length | 440 mm |
| Uniform Zone Length | 200 mm |
| Tube Material | Seamless SS310S nickel-based alloy steel |
| Tube Dimensions | OD 80 mm, ID 72 mm, L 1000 mm |
| Heating Element | Mo-doped Fe-Cr-Al resistance wire |
| Max Ramp Rate | ≤30 °C/min |
| Temperature Control Accuracy | ±1 °C |
| Vacuum Performance | 10⁻² torr (mechanical pump), 10⁻⁵ torr (turbo-molecular pump) |
| External Dimensions | 550 × 380 × 520 mm |
| Net Weight | 55 kg |
| Safety Certifications | CE-compliant |
| Cooling | Dual-layer shell with forced-air circulation and aluminum heat sinks |
| Control System | 30-segment PID programmable controller with overheat & thermocouple break protection |
| Pressure Monitoring | Integrated digital pressure sensor with LED display and dual-limit audible/visual alarm with automatic cutoff |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GSL-1500X-OTF-R60 |
| Power Supply | AC 220 V, 50/60 Hz, 2.5 kW |
| Max Temperature | 1500 °C (≤2 h), Continuous at 1400 °C |
| Heating Zone Length | 300 mm |
| Uniform Temperature Zone | 150 mm |
| Tube Dimensions | OD 60 mm, ID 54 mm, L 1200 mm |
| Rotation Speed | 0–7 rpm |
| Tilt Angle Range | 0–30° |
| Heating Element | Silicon Carbide Rods |
| Insulation | High-Purity Alumina Fiber |
| Interior Coating | 1750 °C Rated Alumina Reflective Coating |
| Max Vacuum | 4.5 × 10⁻² Torr |
| Leak Rate | <0.1 mTorr/s |
| Control Accuracy | ±1 °C |
| Cooling | Dual-shell with three axial fans |
| External Dimensions | 1300 × 600 × 1200 mm |
| Net Weight | 100 kg |
| Compliance | IEC 61000-6-3, IEC 61000-6-4, EN 61000-3-2 |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GSL-1500X |
| Pricing | Upon Request |
| Power Supply | AC 220 V, 50/60 Hz, 2.5 kW |
| Tube Dimensions | OD 50 mm × ID 44 mm × L 762 mm |
| Heating Element | 1600 °C-rated SiC rods |
| Heating Zone Length | 152 mm |
| Uniform Temperature Zone | 50 mm |
| Max Operating Temperature | 1500 °C (≤1 h), 1400 °C continuous |
| Temperature Control Accuracy | ±1 °C |
| Programmable Ramp/Soak | 30-segment PID profile |
| Max Ramp Rate | 20 °C/min |
| Base Vacuum | 10⁻³ torr (mechanical pump), 10⁻⁵ torr (turbo-molecular pump) |
| Chamber Construction | Dual-layer steel housing with high-purity alumina fiber insulation |
| Internal Coating | US-imported alumina reflective coating |
| Safety Features | Over-temperature and thermocouple break alarms |
| Certification | CE-compliant |
| Dimensions (W×D×H) | 400 × 300 × 530 mm |
| Net Weight | 68 kg |
| Standard Accessories | One high-purity α-alumina tube, one pair of vacuum-tight flanges, four SiC heating rods, one K-type thermocouple, four alumina end plugs, one ceramic sample tongs |
| Brand | KJ GROUP |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GSL-1700X-SPC-2 |
| Voltage | AC 208–220 V, 50/60 Hz, Single-Phase |
| Max Power | 500 W, 30 A |
| Chamber | Quartz, Ø6" |
| Sample Stage | Ø50 mm, Rotatable at 5 rpm, Source-to-Stage Distance Adjustable (60–100 mm) |
| Max Temp | 1700 °C |
| Thermocouple | S-type (200–1500 °C), Optional B-type (1200–1700 °C) |
| Temp Control Accuracy | ±1 °C |
| Programmable Ramp/Soak | 30-Step Profile |
| Evaporation Source | Dual Tungsten Filament Baskets |
| Vacuum Gauge | PCG554 Digital Pirani/Cold Cathode Gauge (3.8×10⁻⁵–1125 Torr) |
| Vacuum Port | KF40 |
| Inlet Port | 1/4" NPS with Needle Valve |
| Dimensions (W×D×H) | 440 × 330 × 630 mm |
Show next