- All
- Favorite
- Popular
- Most rated
| Brand | MNK |
|---|---|
| Origin | Beijing, China |
| Model | M8880 |
| Instrument Type | Laboratory Gas Chromatograph |
| Application | High-Purity Gas Analysis |
| Carrier Gas Options | Single selectable gas (e.g., He, H₂, or Ar) |
| Dual-Detector Configuration | PDHID + TCD |
| Independent Temperature Zones | 8 |
| Oven Programmed Ramps | 20-step |
| Back-Flush & Heart-Cut Capability | Integrated |
| Detection Limits (v/v) | PDHID — H₂: 0.06 µL/L, CH₄: 0.08 µL/L, CO: 0.08 µL/L, C₂H₆: 0.01 µL/L, CO₂: 0.09 µL/L, C₂H₄: 0.01 µL/L, C₂H₂: 0.01 µL/L, C₃H₈: 0.01 µL/L, H₂S: 0.01 µL/L, C₃H₆: 0.01 µL/L, SO₂: 0.23 µL/L |
| TCD — O₂ | 49 µL/L, N₂: 70 µL/L |
| PDHID Specifications | Pulsed Discharge Helium Ionization Detector |
| TCD Specifications | Baseline Noise ≤ 20 µV |
| Brand | Southland |
|---|---|
| Origin | USA |
| Model | MOMD480, MOMD525 |
| Measurement Principle | Electrochemical (Galvanic Cell) |
| Range Options | 0–1%/5%/10%/25%/100% (MOMD480) |
| Accuracy | ±1% FS |
| Display | Backlit Color LCD |
| Enclosure Rating | IP66 / NEMA 4X |
| Output | Dual Adjustable Relay Alarms (MOMD525) |
| Operating Environment | Inert, N₂, H₂, CO₂-containing, or mixed gas matrices |
| Compliance | CE, Class I, Div. 1, Groups B, C, D (MOMD625 variant) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | TU-1810 |
| Quotation | Upon Request |
| Wavelength Range | 190–1100 nm |
| Wavelength Accuracy | ±0.3 nm (auto-calibrated at startup) |
| Wavelength Repeatability | 0.2 nm |
| Spectral Bandwidth | Fixed 2 nm |
| Stray Light | <0.3%T (220 nm, NaI |
| Photometric Modes | Transmittance (%T), Absorbance (Abs), Energy |
| Photometric Range | −0.3 to 3.0 Abs |
| Photometric Accuracy | ±0.002 Abs (0–0.5 Abs) |
| Photometric Repeatability | 0.001 Abs (0–0.5 Abs) |
| Baseline Flatness | ±0.002 Abs (190–1100 nm) |
| Baseline Drift | 0.001 Abs/h (500 nm, 0 Abs, after 2 h warm-up) |
| Photometric Noise | ±0.001 Abs (500 nm, 0 Abs, 2 nm SBW) |
| Brand | MNK |
|---|---|
| Origin | Beijing, China |
| Model | GC8810 |
| Instrument Type | Online Gas Chromatograph |
| Application Focus | High-Purity Gas Analysis |
| Detector Configuration | Up to 3 Simultaneous Detectors (PDHID, TCD, FID, FPD) |
| Communication Interface | Ethernet-enabled Industrial Bus Architecture |
| Compliance Context | Designed for GLP/GMP-aligned environments with audit-ready data handling capabilities |
| Brand | MNK |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor & System Integrator |
| Regional Classification | Domestic (China-Made) |
| Model | GC7890B |
| Pricing | Upon Request |
| Brand | MNK |
|---|---|
| Origin | Beijing, China |
| Model | M8880 |
| Instrument Type | Laboratory Gas Chromatograph |
| Application Domain | High-Purity Gas Analysis |
| Carrier Gas Options | Single selectable gas (e.g., He, H₂, or Ar) |
| Detector Configuration | Dual-detector, multi-column parallel architecture |
| Temperature Control | 8 independent zones, 20-step programmable ramping |
| Advanced Functionality | Built-in back-flush module enabling heart-cutting and column switching |
| Data System | Dedicated GC workstation with automated flammability triangle (CH₄–O₂–N₂) explosion hazard assessment |
| Detection Limits (v/v) | PDHID — H₂ (0.06 µL/L), CH₄ (0.08 µL/L), CO (0.08 µL/L), C₂H₆ (0.01 µL/L), CO₂ (0.09 µL/L), C₂H₄ (0.01 µL/L), C₂H₂ (0.01 µL/L), C₃H₈ (0.01 µL/L), H₂S (0.01 µL/L), C₃H₆ (0.01 µL/L), SO₂ (0.23 µL/L) |
| Brand | VICI |
|---|---|
| Origin | USA |
| Model Compatibility | Agilent 8890 / 7890 / 6890 GC |
| Detection Modes | Pulsed DC Helium Discharge (Electron Capture & Helium Photoionization) |
| Detection Limits | Sub-pg to fg (EC mode) |
| Temperature Stability | ±0.02 °C (TCD variant) |
| Carrier Gas Purification | Valco HP2 (He/Ar/Ne/Kr/Xe), NP2 (N₂), <1 ppm reactive impurities |
| Brand | MNK |
|---|---|
| Origin | Beijing, China |
| Model | GC8800 Series |
| Instrument Type | Online Gas Chromatograph |
| Detector Configurability | Up to three simultaneous detectors (TCD, uTCD, FID, FPD, ECD, NPD, PDHID) |
| Injection Options | Packed column, split/splitless capillary, valve injection, 6-/12-position liquid auto-sampler, headspace autosampler, pyrolysis injector |
| Oven Temperature Range | +4 °C above ambient to 450 °C (1 °C increment) |
| Oven Temperature Stability | ±0.1 °C at 200 °C |
| Oven Programmable Stages | 16 temperature ramps |
| Cooling Rate | 260 °C to 50 °C in ~6 min |
| Temperature Zones | 8 independently controlled zones |
| Carrier Gas Control | Electronic Pressure Control (EPC), pressure resolution 0.01 kPa, flow resolution 0.01 sccm |
| Display | 5.7-inch color TFT touchscreen |
| Data Interface | Ethernet (IEEE 802.3), PC-controlled operation or standalone mode |
| Remote Capability | Network-enabled remote monitoring, unattended operation, distributed acquisition, centralized control |
| Multidimensional GC Support | Center-cutting and valve-switching configurations enabled |
| Software | Method-driven acquisition with full parameter storage and recall |
| Compliance | Designed for GLP/GMP environments |
| Brand | MNK |
|---|---|
| Model | GC8800-II |
| Origin | Beijing, China |
| Instrument Type | Laboratory Gas Chromatograph |
| Application Focus | High-Purity Gas Analysis |
| Control Interface | IEEE 802.3 Ethernet |
| EPC Module | Integrated Electronic Pressure Control (EPC) and Electronic Flow Control (EFC) |
| Autosampler Compatibility | Dual-tower 24-position liquid autosampler |
| Optional Gas Autosampling | MNK Cylinder & Gas-Phase Autosampler |
| Ancillary Module Support | MNK Flash Vaporizer for LPG, Butadiene, and 1-Butene analysis |
| Data System | Multi-instrument data aggregation |
| Regulatory Alignment | Designed to support GLP-compliant workflows and 21 CFR Part 11–ready audit trail configuration (when paired with validated software) |
| Brand | SRI |
|---|---|
| Origin | USA |
| Model Variants | 110, 310, 410, 8610C, 8610D |
| Configuration | Benchtop or Portable Chassis Options |
| Detectors | FID, TCD, SCD, PID (User-Selectable) |
| Compliance | ASTM D1945, D1946, D3588, ISO 8573-5, USP <467>, EPA Method TO-14A/TO-15 |
| Data System | Standalone PC-Based Acquisition & Processing Software (No Dedicated Terminal Required) |
| Brand | Restek |
|---|---|
| Model | 23443 |
| Origin | USA |
| Type | Portable Thermal Conductivity-Based Leak Detector |
| Detectable Gases | He, N₂, Ar, CO₂, H₂ |
| Power Source | Rechargeable Ni-MH Battery (6 h typical runtime) |
| Operating Temperature | 0–48 °C |
| Relative Humidity | 0–97 % RH |
| Certifications | CE, RoHS, WEEE |
| Compliance | Compliant with EU Directive 2014/30/EU (EMC), 2011/65/EU (RoHS), and Japan’s JIS C 0950 (RoHS-equivalent) |
| Enclosure Rating | IP54 (dust-protected, water-splashing resistant) |
| Probe Interface | Standard 1/8" Swagelok-compatible stainless steel insertion probe |
| Auto-Shutdown | Enabled after 5 min inactivity |
| Charging Adapter | Universal AC input (100–240 VAC, 50/60 Hz) |
| Brand | VICI |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Valco |
| Pricing | Available Upon Request |
| Brand | MNK |
|---|---|
| Origin | Beijing, China |
| Model | M-EAO |
| Product Type | Online Dew Point Analyzer |
| Operating Temperature Range | −110 °C to +20 °C (dew point) |
| Accuracy | ±1 °C dew point |
| Repeatability | ±0.5 °C |
| Response Time | 5 min to T90 (dry-to-wet transition) |
| Output Signal | 4–20 mA |
| Power Supply | 24 VDC |
| Sensor | Imported high-stability chilled-mirror or aluminum oxide sensor (application-optimized) |
| Enclosure Rating | Ex db IIC T6 Gb |
| Brand | VICI |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | MTGA6002 Online |
| Pricing | Available Upon Request |
| Detector Compatibility | PDHID, PDPID, PDECD, FID, Micro-TCD, RGD |
| Detection Mode | Pulsed Discharge |
| Minimum Detectable Concentration | 1 ppb (for most analytes) |
| Maximum Detector Configuration | 4 simultaneous detectors |
| Communication Interfaces | 4–20 mA, OPC UA, Profibus DP, Ethernet TCP/IP |
| Automation Level | Fully Automated, Remote Operation Capable |
| Design Architecture | Modular, User-Configurable |
| Application Scope | Trace Impurity Analysis in High-Purity Gases, Electronic Specialty Gases, Food-Grade Gas QC, Remote Toxic Gas Monitoring |
| Hazardous Area Suitability | Compatible with Third-Party ATEX/IECEx-Certified Detectors |
| Brand | MNK |
|---|---|
| Origin | Beijing, China |
| Model | MS200S-II |
| Dimensions | 460 × 270 × 300 mm |
| Operating Liquid Inlet Pressure | 100–400 psi |
| Maximum Flash & Jacket Temperature | 230 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Brand | MNK |
|---|---|
| Origin | Beijing, China |
| Model | MY501 |
| Measurement Principle | Potentiometric Electrochemical (Fuel Cell) |
| Range Options | 0–10 ppm, 0–100 ppm, 0–1000 ppm, 0–1 %, 0–25 % O₂ |
| Accuracy | ≤1 % FS (for 0.00–10 ppm range) |
| Repeatability | ≤±1 % FS |
| Response Time (t₉₀) | ≤30 s |
| Resolution | 0.1 ppm |
| Sample Flow Rate | 1000 mL/min |
| Inlet Pressure | 0.05–0.1 MPa |
| Output Signals | 4–20 mA / 0–1 V / 0–10 V DC (selectable) |
| Operating Temperature | –5 °C to +45 °C |
| Relative Humidity | ≤90 % RH (non-condensing) |
| Sensor Lifetime | 24 months (at 25 °C, 1 atm, avg. [O₂] < 1000 ppm) |
| Power Supply | DC 12 V |
| Dimensions (W×H×D) | 212 × 290 × 194 mm |
| Weight | ~2 kg |
| Enclosure Fitting | 1/8″ OD compression fitting |
| Calibration Gas | N₂-based standard with 80 % of full-scale O₂ concentration |
| Compliance | Designed for industrial process monitoring per IEC 61000-6-2/6-4 EMI immunity & emission standards |
| Brand | MNK |
|---|---|
| Origin | Beijing, China |
| Model | GC-8810 |
| Instrument Type | Laboratory Gas Chromatograph |
| Application Domain | Coal Industry Specific |
| Detection Limits | Permanent Gases (N₂, CO₂, O₂) < 10 ppm |
| Analysis Time | ≤ 2 min (including backflush) |
| Modular Configuration | Up to 4 independent GC channels |
| Detector Technology | NEMS-based silicon micro-TCD |
| Flow Control | Electronic Pressure Control (EPC) per channel |
| Temperature Control | Independent oven and column-zone heating per module |
| Brand | SilcoTek |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | SilcoNert2000 |
| Pricing | Available Upon Request |
| Brand | KANTO Chemical |
|---|---|
| Origin | Japan |
| Model | 01118-31 |
| CAS No. | 30586-13-1 |
| pH Transition Range | 9.4 (blue) to 14.0 (red) |
| Purity Grade | Class I (Deer Grade) |
| Loss on Drying (105 °C) | ≤10.0 % |
| Residue on Ignition (as sulfate, after drying) | ≤45.0 % |
| Packaging | 25 g per amber glass bottle |
| Storage | Store sealed in a cool, dry place |
| Brand | Sabio |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Model 6020 |
| Price | Upon Request |
| Measurement Principle | Pulsed UV Fluorescence (PUVF) |
| Range | 0–50 ppb to 0–20 ppm (user-selectable) |
| Detection Limit | < 0.4 ppb |
| Noise | < 0.2 ppb |
| Zero Drift | < 0.5 ppb/24 hr |
| Accuracy | < 1% Full Scale |
| Sample Flow Rate | 0.4–0.8 L/min |
| Operating Temperature | 5–40 °C |
| Power Consumption | 200 W |
| Dimensions (H×W×D) | 133 × 432 × 571.5 mm |
| Weight | 11.3 kg |
| Display | High-resolution color TFT LCD with touchscreen support |
| Communication Interfaces | Ethernet (TCP/IP), USB 2.0, RS-232/485 |
| Analog I/O | 4 configurable voltage channels (0.1 V, 1 V, 2 V, 5 V, 10 V output ranges) |
| Digital I/O | 8 standard TTL-compatible channels |
| Data Logging | Internal non-volatile memory with timestamped records |
| Compliance | EPA Reference Method EQOA-0808-191 (equivalent to EPA Method 40 CFR Part 53, Class I) |
| Software | Menu-driven embedded OS with diagnostic suite, barcode-enabled time-series visualization, Modbus RTU/TCP support |
| Environmental Compensation | Automatic temperature and barometric pressure correction |
| Brand | SilcoTek |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | SilcoNert-2000 |
| Pricing | Upon Request |
| Coating Material | Hydrogenated Amorphous Silicon with Surface Alkylation |
| Deposition Method | Thermal Chemical Vapor Deposition (Non-Plasma) |
| Max Operating Temperature | 450°C (inert), 400°C (oxidizing) |
| Substrate Compatibility | Stainless Steel Alloys, Ceramics, Glass, Titanium, Specialty Metals |
| Max Dimension | 78 in (198 cm) |
| Geometry Flexibility | Full 3D Conformality |
| Thickness Range | 100–500 nm |
| Contact Angle (Hydrophobicity) | ≥65° |
| pH Stability Range | 0–8 |
| Patent Numbers | US 6,444,326 & US 6,511,760 |
| Brand | MNK |
|---|---|
| Origin | Beijing, China |
| Model | MPS950 |
| Product Type | Online Dew Point Analyzer |
| Operating Temperature Range | –100 to 0 °C |
| Accuracy | ±2 °C |
| Repeatability | ≤ ±1 °C |
| Sample Flow Rate | 2–3 L/min (recommended: 2 L/min) |
| Response Time (90%) | 15 min at –10 to –80 °C |
| Pressure Range | 0–1 MPa |
| Ambient Operating Conditions | 5–45 °C, 0–90% RH |
| Output Signal | 4–20 mA |
| Power Supply | 220 VAC ±10%, 50 Hz ±5% |
| Dimensions | 270 × 132 × 330 mm |
| Weight | ~3 kg |
| Brand | MNK |
|---|---|
| Origin | Beijing, China |
| Model | GC8800 |
| Instrument Type | Online Gas Chromatograph |
| Application Domain | Ultra-High-Purity (UHP) Gas Impurity Analysis |
| Detector Type | Pulsed Discharge Helium Ionization Detector (PDHID) |
| Carrier Gas | Ultra-High-Purity Helium (≥99.999%, purified to ≤10 ppb total impurities) |
| Baseline Noise | ≤0.1 mV |
| Baseline Drift | ≤0.5 mV/30 min |
| Detection Limit | ≤1.0 × 10⁻¹⁰ g/mL |
| Gas Control Options | Manual Valving & Electronic Pressure Control (EPC) |
| Data Transmission | Ethernet-enabled Remote Monitoring & Unattended Operation |
| Regulatory Compliance Support | ASTM D7622, ISO 8573-8, SEMI F57, IEC 60400, USP <621>, FDA 21 CFR Part 11-ready audit trail capability |
| Brand | MNK |
|---|---|
| Origin | Beijing, China |
| Model | MQ701-6S |
| Sampling Positions | 6 / 16 / 32 (customizable) |
| Power Consumption | 100 W |
| Power Supply | 220 V, 50 Hz |
| Net Weight | 15 kg (6-position), 25 kg (16-position) |
| Dimensions | 350 × 371 × 270 mm (6-position), 400 × 480 × 630 mm (16-position) |
| Tubing | 1/16″ SilcoNert®-treated stainless steel |
| Interface Options | RS-232, Touch Control, EVENT Trigger, BCD Output |
| Vacuum Source | Diaphragm Pump |
| Compliance | Compatible with ASTM D5504, EPA Method TO-15 & TO-14A, ISO 16000-6 |
Show next