- All
- Favorite
- Popular
- Most rated
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | CC-K6, CC-K6s, KISS K6, KISS K6s |
| Temperature Range | –25 °C to +200 °C |
| Heating Power | 1.6–2.1 kW |
| Cooling Power (at 20 °C) | 0.72 kW (CC-K6), 0.25 kW (KISS K6), 0.40 kW (CC-K6s), 0.26 kW (KISS K6s) |
| Bath Volume | 4.5 L |
| Bath Opening Dimensions | 140 × 120 mm |
| Bath Depth | 150 mm |
| Pump Flow Rate (Pressure/Suction) | up to 27 L/min @ 0.4 bar / 22 L/min @ 0.15 bar (CC-K6) |
| External Circulation Interface | Yes |
| Temperature Stability | ±0.02 K (CC series), ±0.05 K (KISS series) |
| Refrigerant | Natural (R744 / CO₂ or R290 / propane, per model configuration) |
| Safety Class | DIN 12876 Class III / FL (flammable liquid compatible) |
| Controller | Pilot ONE with 7″ capacitive touchscreen, 11-language UI, RS232 interface, Pt100 sensor input, 2-point calibration, calendar-based scheduling, overtemperature & low-level protection |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | PSL |
| Temperature Range | –40 °C to 0 °C / –80 °C to 0 °C / –80 °C to 20 °C |
| Temperature Stability | ±0.5 °C (PSL-1400) / ±1.0 °C (PSL-1810, PSL-2000) |
| Stirring Speed | 100–800 rpm |
| Heating Power | 250 W / 450 W / 750 W |
| Cooling Capacity | Air-Cooled Compressor System (R404A, R507A/R23 Dual-Circuit) |
| Tank Material | SUS304 Stainless Steel |
| Capacity | 2.1 L / 3.5 L / 8 L |
| Stirring Motor Output | 15 W / 25 W / 25 W |
| Safety Features | Leakage Current Protection, Overcurrent Protection, Overheating Prevention, Compressor High-Pressure Cut-off, Sensor Open-Circuit Detection, Self-Diagnostic Function (Heater Fault, Sensor Anomaly, Temp Deviation Alert), Compressor Delay Start |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model Range | CC-208B, CC-212B, CC-215B, CC-220B, CC-225B, KISS 208B, KISS 212B, KISS 215B, KISS 220B, KISS 225B |
| Temperature Range | −30 °C to +200 °C |
| Heating Power | 1.5–2.1 kW |
| Bath Volume | 7.5–23.5 L |
| Bath Depth | 150–200 mm |
| Opening Dimensions (W×D) | 230×127 mm to 290×329 mm |
| Temperature Stability | ±0.02 K (CC series), ±0.05 K (KISS series) |
| Pressure Pump Flow Rate | 27 L/min @ 0.72 bar (CC), 14 L/min @ 0.25 bar (KISS) |
| Suction Pump Flow Rate | 10.5 L/min @ 0.7 bar (CC & KISS) |
| External Dimensions (W×D×H) | 290×350×375 mm to 350×555×425 mm |
| Construction | AISI 304 stainless steel bath tank |
| Cooling Requirement | External chiller required for operation below ambient or at sustained low temperatures |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | Minichillers® |
| Temperature Range | −5 °C to +40 °C (up to +80 °C return fluid temperature) |
| Refrigeration Capacity | 0.25–1.2 kW @ specified setpoints |
| Pump Flow Rate | 10–18 L/min |
| Max. Pressure | 0.3–0.9 bar |
| Dimensions (W×D×H) | 225×360×380 mm to 280×511×424 mm |
| Construction | Stainless steel housing |
| Refrigerant | Natural R744 (CO₂) or R290 (propane), per model |
| Optional | Integrated 1 kW heater (extends range to +100 °C) |
| Interfaces | RS232, USB |
| Display | OLED touchscreen (OLÉ controller) |
| Compliance | CE, RoHS, EN 61000-6-3/6-4, EN 61000-3-2/3-3 |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | DC® |
| Temperature Range | –30 °C to +50 °C |
| Refrigeration Capacity | 2.0–4.7 kW (at –20 °C) |
| Dimensions (W×D×H) | 190×250×360 mm (DC30) / 250×310×415 mm (DC31) / 280×340×465 mm (DC32) |
| Refrigerant | R-410A |
| Power Supply | 230 V, 50/60 Hz |
| IP Rating | IP20 |
| Weight | 22–48 kg (model-dependent) |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | VISCO |
| Temperature Range | -28 °C to +100 °C |
| Heating Power | 1.5–2.1 kW |
| Bath Opening Dimensions (W×D) | 90×90 mm or Φ51 mm |
| Bath Depth | 310 mm |
| Volume | 30 L |
| Pressure Pump Flow Rate | 27 L/min (max) |
| Max Pressure | 0.7 bar |
| External Cooling Coil | Yes |
| Controller | Pilot ONE with 7″ TFT Touchscreen |
| Safety Class | III / FL (DIN 12876-compliant for flammable liquids) |
| Interface | RS232, Pt100 sensor input |
| Calibration | 2-point sensor calibration |
| Software Upgrade Option | E-grade firmware |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | CC-K Series |
| Temperature Range | -20 °C to +200 °C |
| Heating Power | 1.8–2.1 kW |
| Refrigeration Power | 0.12–0.35 kW (at specified setpoints) |
| Bath Volume | 10.5–23.5 L |
| Bath Opening Dimensions | 290 × 152 mm or 290 × 329 mm |
| External Pump Interface | Yes |
| Pressure Pump Flow Rate | 0.4–0.72 L/min @ 2–3.5 bar |
| Suction Pump Flow Rate | 0.12–0.27 L/min @ 0.16–0.2 bar |
| Overall Dimensions (W×D×H) | 350 × 555/560 × 430/615 mm |
| Construction | Full stainless-steel bath vessel |
| Safety Rating | DIN 12876 Class III / FL (flammable liquid compatible) |
| Controller | Pilot ONE touchscreen (7″), 11-language UI, RS232 interface, Pt100 sensor input, 2-point calibration, calendar-based scheduling, overtemperature & low-level protection |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | Ministats® |
| Temperature Range | −25 °C to +200 °C (varies by model) |
| Heating Power | 0.9–2.1 kW |
| Refrigeration Power | 0.3–0.6 kW @ specified temperature |
| Pump Flow Rate (pressure/suction) | up to 5.5 L/min @ 2.8 bar / 0.125 L/min @ 0.35 bar |
| Bath Volume | 7–16 L |
| External Dimensions (W×D×H) | 225×370×429 mm to 300×465×516 mm |
| Temperature Stability | ±0.02 °C |
| Refrigerant | Natural (R744/R290 compliant) |
| Control Interface | Pilot ONE color TFT touchscreen with guided operation wizard |
| Analog I/O | NAMUR-compliant |
| Optional | Com.G@te module for Ethernet-based remote control and PLC/DCS integration |
| Certifications | CE, RoHS, compliant with ISO/IEC 17025 laboratory environment requirements |
| Application Mode | External open-bath circulation with adjustable pressure/suction delivery |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | BFT® |
| Temperature Range | –5 to 80 °C (typical operational range for beer aging: 0–60 °C) |
| Bath Opening Dimensions (W×D) | 350 × 410 mm |
| Bath Depth | 270 mm |
| Heating Power | 2.0 kW |
| Cooling Capacity at 20 °C | 1.2 kW |
| Overall Dimensions (W×D×H) | 460 × 710 × 911 mm |
| Construction | Full stainless steel (AISI 316L wetted parts) |
| Controller | Pilot ONE with 7″ color touchscreen, graph-based real-time temperature profiling, 11-language UI, programmable calendar/time/date scheduler, overtemperature & low-level safety cutoffs |
| Safety Class | DIN 12876-1 Class III / FL (suitable for flammable liquids) |
| Pump System | High-pressure circulation pump + absorption chiller circuit |
| Interfaces | RS232, integrated Pt100 Class A sensor (±0.1 °C accuracy) |
| Cooling Type | Available in water-cooled and air-cooled configurations |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | Unistats®500 Series |
| Temperature Range | –55 °C to +250 °C (GL variants: –50 °C to +200 °C) |
| Heating Power | up to 19.6 kW |
| Refrigeration Power | up to 35 kW |
| Pump Flow Rate | up to 35 L/min |
| Pump Pressure | up to 12 bar |
| Dimensions (W×D×H) | 460–1091 mm × 554–963 mm × 1332–1771 mm |
| Refrigerant Options | Synthetic (R-513A/R-134a) or Natural CO₂ (GL models) |
| Compliance | CE, PED 2014/68/EU, RoHS, ISO 9001-certified manufacturing |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | TC® |
| Temperature Range | –45 °C to +100 °C |
| Refrigeration Capacity | 0.07–0.3 kW (varies by model) |
| External Dimensions (W×D×H) | 190×295×360 mm to 295×500×570 mm |
| Temperature Stability (TC®E models) | ±0.5 K |
| Sensor | Integrated Pt100 |
| Construction | Stainless Steel Housing |
| Optional Accessories | Flexible Stainless Steel Immersion Cooling Head, External Cooling Coil |
Show next