- All
- Favorite
- Popular
- Most rated
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | KBF Series |
| Type | Benchtop Environmental Test Chamber |
| Temperature Range | 0–70 °C |
| Humidity Range | 10–80 % RH |
| Temp. Uniformity (25 °C / 60 % RH) | ±0.1–0.4 K |
| Humidity Stability (25 °C / 60 % RH) | ±1.5 % RH |
| Recovery Time (25 °C / 60 % RH, 30 s door open) | 1–3 min |
| Power Consumption | 1.3–1.7 kW |
| Internal Volume | 127–1610 L |
| Refrigerant | R-600a |
| Compliance | DIN 12880, ICH Q1–Q5, GLP/GMP-ready |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | KBF PRO |
| Temperature Range | −20 to 100 °C |
| Humidity Range | 10–98 % RH |
| Temp. Uniformity (25 °C / 60 % RH) | ±0.2 K (KBF PRO 130 & 260), ±0.3 K (KBF PRO 470–1600) |
| Temp. Stability (25 °C / 60 % RH) | ±0.1 K |
| Humidity Stability (25 °C / 60 % RH) | ±1 % RH |
| Recovery Time (25 °C / 60 % RH, 30 s door open) | 1 min |
| Recovery Time (40 °C / 75 % RH, 30 s door open) | 3–5 min |
| Internal Volume | 127–1610 L |
| Power Consumption | 1.6–1.9 kW |
| Refrigerant | R-290 (eco-friendly hydrocarbon) |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model Series | KB PRO / KBF / KBF PRO with ICH or ICH-LQC Illumination Modules |
| Temperature Range (No Humidity Control) | +18°C to +32°C |
| Temperature & Humidity Range (KBF Series) | +20°C to +50°C / 20–50% RH |
| Extended Temp/Humidity Range (KBF PRO Series) | +10°C to +50°C / 10–80% RH |
| Compliance | ICH Q1B Option 2 (Visible Light) and UV Supplement via Fluorescent Lamps |
| Illumination Types | LED (visible spectrum) + T8 Fluorescent (UV-A/UV-B) |
| Optional Light Dose Control (LQC) | Yes |
| Chamber Volumes | 260 L, 470 L, 720 L |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model Series | M, MK, MKT |
| Application Scope | Thermal Stress Testing, Stability & Durability Evaluation, Material Aging (per EN 60811-1-2 / IEC 60811-1-2) |
| Compliance | ISO 17025-accredited laboratory use, GLP/GMP-compatible operation, FDA 21 CFR Part 11-ready software options available |
| Cooling Method | Dual-circuit refrigeration with cascade system (for MKT series down to –70 °C) |
| Temperature Range | –70 °C to +180 °C (MKT), –40 °C to +180 °C (MK), –20 °C to +180 °C (M) |
| Uniformity | ±0.3 °C (at 100 °C, load-free) |
| Control System | BINDER CTC Advanced Touchscreen Controller with programmable ramp/soak profiles, real-time data logging, and Ethernet interface |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | MKFT |
| Temperature Range | –70 °C to +180 °C |
| Humidity Range | 10–98 % RH |
| Temperature Uniformity | ±0.1–2.0 K (depending on setpoint and chamber size) |
| Temperature Fluctuation | ±0.1–0.5 K |
| Humidity Fluctuation | ≤±2.5 % RH |
| Heating Rate (IEC 60068-3-5) | up to 5.5 K/min |
| Cooling Rate (IEC 60068-3-5) | up to 4.2 K/min |
| Internal Volumes | 115 L / 228 L / 734 L |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | MKT |
| Temperature Range | -70 °C to +180 °C |
| Compliance | DIN 12880 Class 2 Temperature Safety Device, IEC 60068, MIL-STD-810 |
| Humidity Control | Capacitive Hygrometer + Steam Humidification (MKT models) |
| Refrigerant | R-452A |
| Controller | MCS Touchscreen with Real-Time Clock, Ramp Function, Internal Data Logger |
| Interface | Ethernet, USB, 230 V Socket on Right Side |
| Safety | Optical & Acoustic Fault Diagnostics, Heated Viewing Window with LED Lighting, Silicone-Sealed Access Ports (50 mm for MKT 115/240 |
| Castors | 4, 2 with Brakes |
| Internal Volume | 115 L / 228 L / 734 L (MKT 115 / MKT 240 / MKT 720) |
| Net Weight | 305 kg / 380 kg / 610 kg |
| Brand | C&W |
|---|---|
| Origin | Netherlands |
| Model | CW Series Cyclic Corrosion Test Chamber |
| External Dimensions (L×W×H) | 1000×600×645 mm to 2750×1220×1630 mm |
| Internal Dimensions (L×W×H¹×H²) | 600×450×375×565 mm to 2000×1000×850×1175 mm |
| Power Supply | Single-phase or three-phase 380 V, 50/60 Hz |
| Compressed Air Requirement | Oil-free, dry, clean air |
| Humidity Range | 15% to 98% RH (controlled) |
| Temperature Control | Integrated refrigeration compressor system (continuous or standby operation) |
| Optional Features | Deionizer & sediment filter (recommended for water with >50 mg/L TDS), low-water-level alarm, external salt fog collection vessel, condensate-controlled fog generation, variable ventilation, ergonomic control panel, GRP composite enclosure with chemical/thermal resistance, pneumatic lid support, modular sample mounting fixtures |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | KB PRO Series |
| Temperature Range | –20 °C to +100 °C |
| Temp. Uniformity at 37 °C | ±0.2 K |
| Temp. Stability at 37 °C | ±0.1 K |
| Max. Heat Compensation at 37 °C | 450–1000 W |
| Recovery Time (30 s door opening, 37 °C) | 2–6 min |
| Internal Volume | 127–1610 L |
| Power Supply | 208–240 V, 50/60 Hz |
| Rated Power | 1.0–1.8 kW |
| Net Weight | 135–443 kg |
| Noise Level (25 °C) | 46–52 dB(A) |
| Refrigerant | R-290 |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | MK Series |
| Temperature Range | –40 °C to +180 °C |
| Internal Volume | 56–1020 L |
| Temperature Uniformity | ±0.1 K to ±2.0 K (depends on setpoint) |
| Temperature Stability | ±0.1 K to ±0.5 K (depends on setpoint) |
| Heating Rate (IEC 60068-3-5) | up to 5.5 K/min |
| Cooling Rate (IEC 60068-3-5) | up to 4.5 K/min |
| Refrigerant | R-452A (non-ozone-depleting) |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Chamber Volumes | 260 L, 470 L, 720 L, 1060 L, 1600 L |
| Temperature Range (KB PRO) | 0 °C to +50 °C (no humidity control) |
| Temperature Range (KBF) | 10 °C to +50 °C, Humidity Range: 10–50 % RH |
| Temperature Range (KBF PRO) | 10 °C to +50 °C, Humidity Range: 10–90 % RH |
| LED System | 16 modular strips, each with independently controllable warm white (3000 K), cool white (6500 K), and deep red (660 nm) channels |
| PAR Irradiance | Up to 1000 µmol·m⁻²·s⁻¹ (simulating full sunlight) |
| Control Interface | Touch-enabled external controller with programmable light recipes, twilight simulation, and fresh-air exchange mode |
| Compliance | Designed per IEC 61000-6-3 (EMC), EN 61010-1 (safety), and compatible with GLP/GMP documentation workflows |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | MKFT115 / MKFT240 / MKFT720 |
| Temperature Range | –70 °C to +180 °C |
| Humidity Range | 10 % RH to 98 % RH |
| Internal Volume | 115 L / 228 L / 734 L |
| Refrigerant | R-452A |
| Humidity Control | Capacitive Sensor + Steam Humidification |
| Controller | MCS Touchscreen with Real-Time & Segment Programming |
| Data Logging | Integrated Internal Recorder + USB Export |
| Compliance | DIN 12880, IEC 60068-3-5, IEC 60068-3-6, MIL-STD-810G (climate profiles), GLP/GMP-ready audit trail support via optional software |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | FDT |
| Net Weight | 50 kg |
| Dimensions (W×D×H) | 530 × 720 × 1100 mm (standard) |
| Power Supply | 110–240 VAC, 50–60 Hz |
| Display | 160 × 128 pixel alphanumeric graphic LCD with keypad |
| Compliance | ISO 7765, ASTM D1709 Method A |
| Fixture | Pneumatic clamping system |
| Drop Height | Fixed at 0.66 m |
| Standard Weights | 2 × 5 g, 8 × 15 g, 8 × 30 g, 8 × 60 g |
| Test Modes | Pass/Fail counter for impact failure assessment |
| Safety | Dual-hand release mechanism |
| Mounting | Benchtop configuration |
| Brand | C&W |
|---|---|
| Origin | Netherlands |
| Model | CW1001–CW1020 Series |
| Internal Volume | 100 L to 2000 L |
| External Dimensions (L×W×H) | 1000×600×645 mm to 2750×1220×1630 mm |
| Internal Dimensions (L×W×H¹×H²) | 600×450×375×565 mm to 2000×1000×850×1175 mm |
| Power Supply | 13–32 A, Single- or Three-Phase 230/380 V, 50/60 Hz |
| Compressed Air Requirement | Oil-free, dry, filtered |
| Pressure | 2–4 bar (30–60 psi) for spray generation |
| Temperature Range | 30–80 °C (chamber), ±1 °C accuracy |
| Saturated Air Tower | 65 °C ±1 °C, NiCr heating element with overheat protection and auto-refill humidifier |
| Salt Solution Reservoir | 114 L mobile external tank, integrated filtration, ~14 days continuous operation |
| Control System | Microprocessor-based, 7 programmable test methods, cycle timer with remaining count, spray/dry/purge sequencing |
| Optional | Low-level alarm, ergonomic control panel, GRP corrosion-resistant chamber body, insulated apex lid with gas spring support |
| Compliance | Designed to meet ASTM B117, ISO 9227, JIS Z2241, DIN 50021 requirements |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | MKF |
| Temperature Range | -40 °C to +180 °C |
| Humidity Range | 10 % RH to 98 % RH |
| Internal Volume | 60 L to 734 L (depending on model) |
| Integrated Water Tank Capacity | 20 L |
| Refrigerant | R-452A |
| Compliance | DIN 12880 Class 2 Temperature Safety Device, IEC 60068, MIL-STD-810, ASTM D4332 |
| Control System | MCS Touchscreen Controller with Time/Real-Time Programming, Built-in Data Logger, USB & Ethernet Interfaces |
| Condensation Protection | Programmable |
| Humidity Generation | Steam-based, Capacitive RH Sensor |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST XXL+ ST |
| Lamp Type | Air-Cooled Xenon Arc (3 × 1700 W) |
| Exposure Area | 740 mm × 368 mm (2925 cm²) |
| Irradiance Control Range | 30–80 W/m² (300–400 nm) |
| Black Standard Temperature (BST) Range | Up to 100 °C |
| Chamber Temperature (CHT) Range | Up to 70 °C |
| Humidity Control | Ultrasonic Humidification System (60 L Integrated Tank) |
| Sample Spray System | Front & Rear Nozzles |
| Tilted Test Plane | 5° for Drainage |
| Filter Options | Extended UV Cut-off at 280 nm, IR-Reflective Quartz Filter, Optional Daylight & Window Glass Filters |
| Compliance | SAE J2412, SAE J2527, ISO 4892-2, ASTM G155 |
| Interface | 7″ Touchscreen (13 Languages), Ethernet, RS-232, SD Card Slot |
| Software Compatibility | XenoTouch (Remote Control, Email Alert, Real-Time Monitoring) |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST XLS+ |
| Chamber Dimensions | 90 × 54 × 62 cm |
| Exposure Area | 1170 cm² (39 × 30 cm) |
| Lamp | 1 × Air-Cooled 1700 W Xenon Arc Lamp |
| Irradiance Range | 30–65 W/m² (300–400 nm) |
| Black Standard Temperature (BST) | 45–100 °C |
| Control Interface | Touchscreen (13 languages), Ethernet, RS232, Internal Memory |
| Compliance | ISO 4892-1, CIE Publication No. 85 |
| Programmable Tests | 10 profiles, up to 12 stages each |
| Optional Accessories | SunSpray (spray), SunFlood (immersion), SunCool (cooling) |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST CPS+ |
| Chamber Dimensions | 90 × 35 × 35 cm |
| Exposure Area | 560 cm² (28 × 20 cm) |
| Lamp | Air-Cooled 1500 W Xenon Arc Lamp |
| Irradiance Control Range | 30–65 W/m² (300–400 nm) |
| Black Standard Temperature (BST) Range | 35–100 °C (without SunCool) |
| Predefined Test Methods | 2 |
| User-Defined Test Programs | 6 |
| Display | Monochrome LCD with Keypad Interface |
| Language Support | English, German, Italian, French, Spanish, Polish, Russian, Chinese |
| Compliance | ISO 4892-1, ASTM G155, IEC 60068-2-9, JIS D 0205, SAE J2527 |
| Optional Accessories | Window Glass Filter, Daylight ID65 Filter, Cool White Fluorescent Filter, SunCool Active Cooling System, SunFlood Immersion System (40 L, temp-controlled), SunTray Sample Exchange Unit (8 × PMMA trays), Water-Cooled Sample Stage, ICH-D10/20/30 Powder Holders, SunCal BB/WB/Lux BST Calibration Sensors |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | UVCTest |
| Chamber Type | UV-C Environmental Aging Test System |
| Light Source | UVC Germicidal Lamps (254 nm) |
| Temperature Range | Ambient to 80 °C |
| Humidity Control | Optional Integrated RH Module (10–95% RH, ±3% RH) |
| Sample Capacity | Standard 300 mm × 300 mm × 150 mm Exposure Zone |
| Compliance | ASTM G154, ISO 4892-3, IEC 60068-2-5 (UVC-modified), ATLAS Internal UV-C Irradiance Calibration Protocol |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST XXL+ FD |
| Dimensions | 90 × 91 × 172 cm |
| Exposure Area | 3000 cm² (740 × 368 mm) |
| Lamp Configuration | 3 × air-cooled 1700 W xenon arc lamps |
| Irradiance Control Range | 30–65 W/m² (300–400 nm) |
| Black Standard Temperature (BST) / Black Panel Temperature (BPT) Range | 25–100 °C (with SunCool cooling system) |
| Chamber Temperature (CHT) Range | 15–70 °C |
| Humidity Control | ultrasonic humidification system (operational without SunCool) |
| Spray System | integrated 60 L tank, 25–70 °C spray cycles |
| Sample Plane Tilt | 5° |
| Irradiance & Temperature Tolerance | user-definable per parameter |
| Pre-programmed Tests | 10 free multi-stage test programs (up to 12 stages each) |
| Compliance | ISO 4892-1, CIE 85, ASTM G155, IEC 60068-2-9 |
| Interface | 7-inch color touchscreen (13 languages), Ethernet, RS232, memory card slot |
| Optional Software | XenoTouch (Remote Control, Email Alert, Online Monitoring) |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST XXL+ |
| Chamber Dimensions (W×D×H) | 90 × 91 × 172 cm |
| Exposure Area | 79 × 39 cm (3000 cm²) |
| Lamp Configuration | 3 × air-cooled 1700 W xenon arc lamps |
| Irradiance Control Range | 30–65 W/m² (300–400 nm) |
| Black Standard Temperature (BST) Control Range | up to 100 °C (light phase) |
| Chamber Temperature (CHT) Control Range | up to 70 °C (light phase) |
| Humidity Control | ultrasonic humidification system |
| Water Spray System | 60 L integrated tank |
| Sample Plane Tilt | 5° |
| Test Termination Modes | radiant exposure (J/m²), light exposure time, or total runtime |
| Compliance | ISO 4892-1, CIE 85, ASTM G155, IEC 60068-2-9, ICH Q1B, Q5C |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | UVTest |
| Radiation Uniformity | ±4% |
| Irradiance Range | 0.35–1.55 W/m² (UVA), 0.35–1.00 W/m² (UVB) |
| Black Panel Temperature Range (UV Phase) | 35–80°C (95–176°F) |
| (Condensation Phase) | 35–60°C (95–140°F) |
| Sample Capacity | Up to 48 specimens on 24 dual-position sample racks |
| Approx. Weight | 140 kg (310 lbs) |
| Power Supply | 120 V (±10%), 1-phase, 2-wire (1/N/PE), 50/60 Hz, 12 A |
| Spray Water Pressure | 25–40 psi (1.7–2.7 bar) |
| Condensate Water Pressure | 2–60 psi (0.1–4.1 bar) |
Show next