- All
- Favorite
- Popular
- Most rated
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | C-MAG HS 7 digital |
| Max. Stirring Volume (H₂O) | 10 L |
| Motor Output Power | 1.5 W |
| Rotation Direction | Counterclockwise |
| Speed Control | Dial (0–6) |
| Speed Range | 100–1500 rpm |
| Max. Stir Bar Length | 80 mm |
| Heater Power Output | 1000 W |
| Heating Temperature Range | 50–500 °C |
| Heating Rate | 5 K/min |
| Temperature Setting Accuracy (Heating Plate) | ±5 K |
| Medium Temperature Control Accuracy (with PT1000) | ±0.5 K |
| Medium Temperature Display Resolution (with PT1000) | 0.1 K |
| Safety Cut-off Temperature | 550 °C |
| Working Plate Material | Ceramic |
| Plate Dimensions | 180 × 180 mm |
| Device Dimensions (W × H × D) | 215 × 105 × 330 mm |
| Weight | 5 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Class | IP21 (DIN EN 60529) |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Total Input Power | 1020 W |
| External Temperature Sensor Interface | PT1000 |
| Operating Modes | Standard / Safety / Lock |
| Self-Heating (22 °C ambient, 1 h) | +1 K |
| Control Panel | Elevated LCD with Dual Temperature Display (Setpoint & Actual) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | C-MAG MS 10 |
| Max. Stirring Volume (H₂O) | 15 L |
| Motor Output Power | 1.5 W |
| Rotation Direction | Counter-Clockwise |
| Speed Control | Analog Dial (0–6) |
| Speed Range | 100–1500 rpm |
| Max. Stir Bar Length | 80 mm |
| Hotplate Material | Ceramic |
| Plate Dimensions | 260 × 260 mm |
| Overall Dimensions | 300 × 105 × 415 mm |
| Weight | 6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP21 (per DIN EN 60529) |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Input Power | 30 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | TWISTER Add-on Unit |
| Motor Output Power | 5 W |
| Speed Range | 100–3000 rpm |
| Speed Setting Accuracy | ±100 rpm |
| Stirring Volume Range (H₂O) | 0.005–5 L |
| Stir Bar Length Compatibility | 10–30 mm |
| Heating Plate Self-Heating (22°C ambient, 1 h) | +6 K |
| Workplate Material | Glass |
| Workplate Dimensions | 124 × 124 mm |
| Unit Dimensions | 135 × 24 × 135 mm |
| Weight | 0.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Rating | IP66 (DIN EN 60529) |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Instrument Input Power | 10 W (operational), 2 W (standby) |
| DC Supply | 24 V =, Current Draw: 400 mA |
| Module Scalability | Up to 16 units (≥4 units require TWISTER HUB) |
| Master-Slave Synchronization | Supported (≥2 units) |
| Cavity Recognition | Optional activation/deactivation |
| Acceleration Ramp Control | Available via HUB only |
| Independent Stirring Groups | Up to 6 (via HUB) |
| Communication Interfaces | RS232 (optional), USB (optional), Bluetooth (optional), Wi-Fi (optional) |
| Timer Function | Adjustable (6 s–1 min) |
| Intermittent Mode | Yes |
| Viscosity Trend Monitoring | Yes |
| Stir Bar Ejection Detection | Optional |
| Graphical Display Function | Optional |
| Programmable Profiles | Optional |
| No-Load Speed Deviation (1500 rpm, 25°C, nominal voltage) | ±2 % |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 30 digital |
| Max. Stirring Volume (H₂O) | 20 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Type | Brushless DC Motor |
| Speed Display | LED |
| Speed Range | 0/50–500 rpm |
| Max. Viscosity | 20,000 mPa·s |
| Max. Output Power at Shaft | 15.7 W |
| Duty Cycle | Continuous (100 %) |
| Max. Torque at Shaft | 30 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Chuck Jaw Range | 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Functionality (Insertion at Standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.3 N·m |
| Timer Display | None |
| Housing Material | Die-cast Aluminum with Thermoplastic Coating |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.26 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (per DIN EN 60529) |
| USB Interface | Yes |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Standby Power Consumption | 0.3 W |
| DC Supply | 24 V = |
| Current Draw | 1300 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RH basic |
| Motor Output Power | 2 W |
| Max. Stirring Volume (H2O) | 15 L |
| Speed Range | 100–2000 rpm |
| Stir Bar Length Compatibility | 20–80 mm |
| Heating Plate Material | Stainless Steel 1.4301 + Copper Composite |
| Heating Power | 600 W |
| Temperature Range | 50–320 °C |
| Adjustable Safety Cut-off Temperature | 100–360 °C |
| Heating Rate (in 1 L M50 silicone oil, H1500 vessel) | 6 K/min |
| Working Plate Diameter | Ø 135 mm |
| Dimensions (W × D × H) | 160 × 100 × 250 mm |
| Weight | 3.135 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Protection Class | IP21 |
| Supply Voltage | 230 V, 50/60 Hz |
| Total Input Power | 620 W |
| Compliance | DIN 12878, DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MINISTAR 20 digital |
| Max. Stirring Volume (H₂O) | 15 L |
| Motor Input Power | 60 W |
| Motor Output Power | 46 W |
| Drive Type | Brushless DC Motor |
| Speed Range | 0/50–2000 rpm |
| Speed Display | LED |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 10,000 mPa·s |
| Max. Output Torque | 20 N·cm |
| Continuous Duty Cycle | 100 % |
| Shaft Clamp Type | Fixed Chuck |
| Clamp Range | Ø 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.075 N·m |
| Housing Material | Cast Aluminum Coated / Thermoplastic Polymer |
| Dimensions (W × H × D) | 70 × 193 × 147 mm |
| Weight | 1.56 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (DIN EN 60529) |
| USB Interface | Yes |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Device Input Power | 69 W |
| Standby Power Consumption | 0.5 W |
| DC Supply | 24 V = |
| Current Draw | 2900 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | C-MAG HS 4 digital |
| Max. Stirring Volume (H₂O) | 5 L |
| Motor Output Power | 1.5 W |
| Rotation Direction | Counter-Clockwise |
| Speed Control | 6-step dial |
| Speed Range | 100–1500 rpm |
| Max. Stir Bar Length | 30 mm |
| Heating Power | 250 W |
| Heating Temperature Range | 50–500 °C |
| Heating Rate | 2.5 K/min |
| Plate Temperature Setting Accuracy | ±5 K |
| External Temperature Sensor Interface | PT1000 |
| Fixed Safety Cut-off Temperature | 550 °C |
| Working Plate Material | Ceramic |
| Plate Dimensions | 100 × 100 mm |
| Overall Dimensions | 150 × 105 × 260 mm |
| Weight | 3.566 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Class | IP21 (DIN EN 60529) |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Total Input Power | 270 W |
| Temperature Display | Dual LCD (setpoint & actual) |
| Media Temperature Accuracy (with PT1000) | ±0.5 K |
| Media Temperature Resolution (with PT1000) | 0.1 K |
| Operating Modes | Standard / Safety / Lock |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | C-MAG HS 10 |
| Stirring Positions | 1 |
| Max. Stirring Volume (H₂O) | 15 L |
| Motor Output Power | 1.5 W |
| Rotation Direction | Counter-Clockwise |
| Speed Control | Analog Dial (0–6) |
| Speed Range | 100–1500 rpm |
| Max. Stir Bar Length | 80 mm |
| Heating Power Output | 1500 W |
| Heating Temperature Range | 50–500 °C |
| Heating Rate | 5 K/min |
| Temperature Setting Accuracy | ±5 K |
| External Temperature Sensor Interface | ETS-D5 |
| Over-Temperature Safety Cut-Off | 550 °C |
| Plate Material | Ceramic |
| Plate Dimensions | 260 × 260 mm |
| Overall Dimensions | 300 × 105 × 415 mm |
| Weight | 6 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Class | IP21 (per DIN EN 60529) |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Total Input Power | 1520 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | KMO 3 basic |
| Motor Output Power | 9 W |
| Max. Stirring Volume (H2O) | 5 L |
| Speed Range | 10–1500 rpm |
| Speed Setting Accuracy | ±10 rpm |
| Speed Deviation (no-load, 1500 rpm, 25 °C) | ±2 % |
| Stir Bar Length Compatibility | 20–80 mm |
| Heating Plate Self-Heating (22 °C ambient, 1 h) | +2 K |
| Work Surface Material | Tempered Glass |
| Work Surface Dimensions | 140 × 120 mm |
| Illumination | Adjustable White LED Panel, Max. Brightness 15000 lx |
| Auto Reverse Rotation | Yes |
| Touch Control Interface | Yes |
| Display | LED, Brightness-Adjustable |
| Lock Function | Yes |
| Integrated USB Interface | Yes (for Labworldsoft control & firmware updates) |
| Mounting Thread for Support Rod | Integrated M6 Female Thread |
| Protection Class | IP42 |
| Operating Ambient Temperature | 5–40 °C |
| Max. Relative Humidity | 80 % |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Device Input Power | 13 W |
| Standby Power Consumption | 0.8 W |
| DC Supply | 24 V =, Current Draw: 500 mA |
| Dimensions (W × H × D) | 153 × 62.5 × 227 mm |
| Weight | 1.471 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RET control-visc white |
| Motor Output Power | 9 W |
| Max. Stirring Volume (H2O) | 20 L |
| Speed Range | 50–1700 rpm |
| Speed Setting Accuracy | ±10 rpm |
| Stirrer Bar Length Compatibility | 20–80 mm |
| Heating Plate Material | Enamel-Coated Ceramic |
| Heating Plate Diameter | Ø135 mm |
| Heating Power | 600 W |
| Heating Temperature Range | Ambient + Self-Heating (up to +28 K) to 340 °C |
| Temp. Setting Range | 0–340 °C |
| Temp. Setting Resolution | 0.1 K |
| External Temperature Sensor Interface | PT100/PT1000 (dual-input) |
| Media Temp. Accuracy (e.g., 1 L M50 silicone oil in H1500) | ±0.1 K |
| Media Heating Rate | 7 K/min |
| Max. Media Temp. | 270 °C |
| Safety Overtemperature Range | 50–380 °C |
| Integrated Balance Capacity | 10–5000 g |
| Balance Accuracy | ±(0.3% + 2) g |
| Balance Resolution | 1 g |
| pH Measurement Support | Yes (BNC female socket) |
| Display | Full-color TFT screen with multilingual UI |
| Timer & Countdown Function | Yes |
| Intermittent Mode | Yes |
| Viscosity Trend Monitoring | Yes |
| Stirrer Bar Detection (Jump Detection) | Yes |
| Graphical Data Plotting | Yes |
| Programmable Protocols | Yes |
| Media Detection Sensor (Error Code 5) | Yes |
| Lock Key Function | Yes |
| Post-Shutdown Temperature Hold Display | Yes (until plate <50 °C) |
| Enclosure Protection Rating | IP42 (per DIN EN 60529) |
| Communication Interfaces | RS232, USB (for remote control, data export, firmware updates) |
| Input Voltage | 220–240 V AC, 50/60 Hz |
| Total Instrument Power Consumption | 650 W |
| Dimensions (W×H×D) | 160 × 270 × 85 mm |
| Weight | 2.7 kg |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RCT basic Aluminum |
| Power Input | 820 W |
| Max. Stirring Volume (H₂O) | 20 L |
| Max. Load Capacity | 25 kg |
| Motor Type | Brushless DC Motor |
| Speed Range | 50–1500 rpm |
| Speed Setting Accuracy | ±10 rpm |
| Speed Display | LED (set & actual) |
| Heating Temperature Range | RT + self-heating to 310 °C |
| Temp. Setting Range | 0–310 °C |
| Temp. Control Accuracy (external PT1000, 500 mL H₂O) | ±0.5 K |
| Temp. Control Accuracy (ETS-D7 or PT Wireless, same condition) | ±0.2 K |
| Heating Power | 800 W |
| Plate Material | Anodized Aluminum |
| Plate Diameter | Ø135 mm |
| Dimensions (W×D×H) | 160 × 100 × 200 mm |
| Weight | 2.3 kg |
| Protection Rating | IP54 |
| Safety Compliance | EN IEC 61010-2-010 |
| Interface | RS232, USB-C, optional WPAN (USB WD) |
| Operating Ambient | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | C-MAG MS 7 |
| Stirring Positions | 1 |
| Max. Stirring Volume (H2O) | 10 L |
| Motor Output Power | 1.5 W |
| Rotation Direction | Clockwise |
| Speed Control | Analog Dial (0–6) |
| Speed Range | 100–1500 rpm |
| Max. Stir Bar Length | 80 mm |
| Hotplate Material | Ceramic |
| Plate Dimensions | 180 × 180 mm |
| Overall Dimensions | 220 × 105 × 335 mm |
| Weight | 5 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP21 (per DIN EN 60529) |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Input Power | 30 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RH basic white |
| Motor Output Power | 2 W |
| Max. Stirring Volume (H2O) | 15 L |
| Speed Range | 100–2000 rpm |
| Stir Bar Length Compatibility | 20–80 mm |
| Heating Power | 600 W |
| Heating Temperature Range | 50–320 °C |
| Adjustable Safety Temperature Limit | 100–360 °C |
| Plate Material | Enamel-coated Steel |
| Plate Diameter | Ø 135 mm |
| Dimensions (W × D × H) | 160 × 100 × 250 mm |
| Weight | 3.135 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Protection Class | IP21 |
| Voltage | 230 V, 50/60 Hz |
| Input Power | 620 W |
| External Temperature Sensor Interface | ETS-D5 compatible |
| Compliance | DIN 12878, DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 7.5 |
| Max. Volume (H₂O) | 5 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Principle | Brushless DC Motor |
| Speed Display | LED |
| Speed Range | 0/50–2000 rpm |
| Max. Viscosity | 4000 mPa·s |
| Max. Output Power at Shaft | 15.7 W |
| Duty Cycle | 100 % |
| Max. Torque | 7.5 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Chuck Capacity | Ø 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.075 N·m |
| Timer Display | None |
| Housing Material | Die-cast Aluminum Coated / Thermoplastic Polymer |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.18 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (per DIN EN 60529) |
| USB Interface | Yes |
| Supply Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Standby Power Consumption | 0.3 W |
| DC Output | 24 V = |
| Current Draw | 1300 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MINISTAR 40 control |
| Max. Stirring Volume (H₂O) | 25 L |
| Motor Input Power | 60 W |
| Motor Output Power | 46 W |
| Drive Type | Brushless DC Motor |
| Speed Range | 0/30–1000 rpm |
| Speed Display | LCD |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1% (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 30,000 mPa·s |
| Max. Output Torque | 40 N·cm |
| Continuous Duty Cycle | 100% |
| Torque Display | Yes |
| Torque Measurement Deviation | ±4 N·cm |
| Temperature Interface | PT1000 |
| Temp. Display | Yes |
| Temp. Range | –10 to 350 °C |
| Temp. Accuracy | ±0.5 K (DIN EN 60751 Class A) |
| Clamp Shaft Diameter Range | 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Timer | Yes |
| Timer Range | 1–6000 min |
| Housing Material | Cast Aluminum Coated / Thermoplastic Polymer |
| Dimensions (W×H×D) | 70 × 193 × 154 mm |
| Weight | 1.72 kg |
| Ambient Temp. Range | 5–40 °C |
| Relative Humidity Limit | 80% |
| Protection Rating | IP54 |
| USB Interface | Yes |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Instrument Input Power | 69 W |
| DC Supply | 24 V = |
| Current Draw | 2900 mA |
| Vibration Detection | Yes (Auto-shutdown on excessive vibration) |
| Bluetooth | Yes |
| Software Compatibility | labworldsoft® |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | C-MAG HS 7 control |
| Max. Stirring Volume (H₂O) | 20 L |
| Motor Power Output | 9 W |
| Speed Range | 50–1500 rpm |
| Speed Setting Accuracy | ±10 rpm |
| Speed Display | Dual LCD (setpoint & actual) |
| Rotation Direction | Reversible (clockwise/counter-clockwise) |
| Heating Power | 1000 W |
| Heating Temperature Range | Ambient to 500 °C |
| Temp. Setting Accuracy (heating plate) | ±5 K at 100 °C |
| External Temp. Sensor Support | PT1000, ETS-D5, ETS-D6 |
| Media Temp. Control Accuracy (with ETS-D6) | ±0.2 K |
| Heating Rate (1 L H₂O in H1500 vessel) | 5 K/min |
| Safety Temp. Limit Range | 100–650 °C |
| Plate Material | Ceramic-coated glass |
| Plate Dimensions | 180 × 180 mm |
| Timer Range | 1 s – 143940 min (99 days, 99 h, 99 min) |
| Interface | RS232, USB |
| Protection Rating | IP21 |
| Dimensions (W × H × D) | 220 × 88 × 354 mm |
| Weight | 4 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Input Voltage | 220–230 V AC, 50/60 Hz |
| Total Power Consumption | 1020 W (max), 2 W (standby) |
| SmartTemp® Technology | Yes |
| Firmware Upgradability | Yes |
| Auto-Reverse Mode | Yes |
| Intermittent Stirring Mode | Yes |
| Viscosity Trend Monitoring | Yes |
| Media Detection Sensor (Error 5) | Yes |
| Temp. Measurement Range (PT1000) | −10 to 350 °C |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Midi MR 1 digital |
| Motor Output Power | 19 W |
| Max. Stirring Volume (H2O) | 50 L |
| Speed Range | 0–1000 rpm |
| Max. Stir Bar Length | 80 mm |
| Plate Material | Stainless Steel 1.4301 |
| Plate Dimensions | 350 × 350 mm |
| Device Dimensions | 360 × 110 × 430 mm |
| Weight | 10.7 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP21 (per DIN EN 60529) |
| Interface | RS232 + USB |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Input Power | 80 W |
| Fuse | 2 × T4A, 250 V |
| Timer Range | 0–56 min (or continuous mode) |
| Heating Function | None |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 15 digital |
| Max. Stirring Volume (H₂O) | 10 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Type | Brushless DC Motor |
| Speed Display | LED |
| Speed Range | 0/50–1000 rpm |
| Max. Viscosity | 8000 mPa·s |
| Max. Output Power (Stirring Shaft) | 15.7 W |
| Continuous Duty Cycle | 100 % |
| Max. Torque (Shaft) | 15 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Chuck Diameter Range | 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.15 N·m |
| Timer Display | None |
| Housing Material | Die-cast aluminum with thermoplastic polymer coating |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.26 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (per DIN EN 60529) |
| USB Interface | Yes |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Standby Power Consumption | 0.3 W |
| DC Supply | 24 V = |
| Current Draw | 1300 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RO 5 |
| Stirring Positions | 5 |
| Position Spacing | 90 mm |
| Speed Range | 0–1200 rpm |
| Speed Control Resolution | 10 rpm steps |
| Speed Deviation per Position | 0 % |
| Max. Stirring Volume (H₂O) | 0.4 L |
| Stir Bar Length Compatibility | 25–30 mm |
| Plate Material | Stainless Steel 1.4301 |
| Plate Dimensions | 120 × 470 mm |
| Overall Dimensions | 120 × 60 × 570 mm |
| Weight | 3.66 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Ingress Protection | IP40 (per DIN EN 60529) |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Power Consumption | 13 W |
| DC Supply | 24 V |
| Features | Touch-key operation, bidirectional rotation control, error code display, non-wearing magnetic coil technology, removable transparent anti-slip mat, no heating function |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 60 control |
| Motor Input Power | 168 W |
| Motor Output Power | 131 W |
| Max. Stirring Volume (H₂O) | 40 L |
| Speed Range | 0/30–2000 rpm |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 50,000 mPa·s |
| Max. Output Power at Shaft | 126 W |
| Max. Torque | 60 N·cm |
| Torque Measurement Deviation | ±6 N·cm |
| Temperature Range (with PT1000) | –10 to +350 °C |
| Temp. Measurement Accuracy | ±0.5 K (DIN EN 60751 Class A) |
| Temp. Sensor Limiting Error | ≤ ±(0.15 + 0.002× |
| Shaft Clamp Range | 0.5–10 mm |
| Hollow Shaft ID | 11 mm |
| Hollow Shaft Insertion (stationary) | Yes |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 220 mm |
| Timer Range | 1–6000 min |
| Protection Rating | IP40 (DIN EN 60529) |
| Interfaces | RS232, USB |
| Voltage | 230 V, 50/60 Hz |
| Instrument Input Power | 176 W |
| Dimensions (W×H×D) | 86 × 267 × 230 mm |
| Weight | 4.7 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Display | Multilingual TFT |
| Control Type | Electronic, Continuous (Infinitely Variable) |
| Safety Features | Overload Protection, Lockable Safety Loop, Error Code Display |
| Included Accessories | H 67.60 Temperature Sensor, WH 11 Wireless Controller |
| Motor Type | Brushless DC |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | IKA myPlate |
| Motor Output Power | 2 W |
| Max. Stirring Volume (H₂O) | 1.5 L |
| Speed Range | 100–2500 rpm |
| Speed Setting Accuracy | ±10 rpm |
| Max. Stir Bar Length | 30 mm |
| Heating Plate Self-Heating (22°C ambient, 1 h) | +2 K |
| Working Plate Material | Tempered Glass |
| Working Plate Diameter | Ø 135 mm |
| Dimensions (W × H × D) | 152 × 30 × 164 mm |
| Weight | 0.76 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % RH |
| Ingress Protection | IP54 (per DIN EN 60529) |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Max. Input Power | 4 W |
| Standby Power Consumption | 1 W |
| DC Supply | 12 V =, Current Draw: 300 mA |
| Display | Dual LED (set value & actual value) |
| Control Interface | Capacitive Touch Keys |
| Rotation Direction | Clockwise Only |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 200 P4 control |
| Max. Stirring Volume (H₂O) | 100 L |
| Motor Input Power | 134 W |
| Motor Output Power | 76 W |
| Drive Type | Brushless DC Motor |
| Speed Range I (50/60 Hz) | 4–108 rpm |
| Speed Range II (50/60 Hz) | 16–530 rpm |
| Speed Control | Continuous, Electronic |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1% (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Torque I | 660 N·cm |
| Max. Torque II | 130 N·cm |
| Rated Torque | 6.6 N·m |
| Torque Measurement Deviation | ±60 N·cm (Range I), ±10 N·cm (Range II) |
| Max. Viscosity | 150,000 mPa·s |
| Stirrer Shaft Output Power | 76 W |
| Duty Cycle | 100% continuous operation |
| Clamp Jaw Range | 0.5–10 mm |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 220 mm |
| Temperature Measurement | Integrated PT1000 sensor (±0.5 K, DIN EN 60751 Class A) |
| Temp. Range | –10 to +350 °C |
| Temp. Resolution | 0.1 K |
| Timer Range | 1–6000 min |
| Display | TFT, Multilingual |
| Interfaces | RS232, USB |
| IP Rating | IP40 |
| Dimensions (W×H×D) | 91 × 379 × 231 mm |
| Weight | 5.8 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Safety Features | Overload protection, Short-term overload capability, Lockable safety circuit, Error code display |
| Accessories Included | H 67.60 temperature probe, WH 11 wireless controller |
| Remote Control Range | Up to 150 m (site-dependent) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RT 10 |
| Stirring Positions | 10 |
| Position Spacing | 90 mm |
| Speed Range | 0–1000 rpm |
| Speed Resolution | 10 rpm steps |
| Speed Stability | ±0% deviation per position under load |
| Max. Stirring Volume (H₂O) | 0.4 L per position |
| Stir Bar Length Compatibility | 25–30 mm |
| Heating Power Output | 375 W |
| Heating Temperature Range | Ambient to 120 °C |
| Heating Rate | 3 K/min |
| Adjustable Safety Temperature Limit | 50–150 °C |
| Plate Material | Anodized Aluminum |
| Plate Dimensions | 180 × 495 mm |
| Device Dimensions (W×H×D) | 190 × 60 × 610 mm |
| Weight | 7.5 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Ingress Protection | IP 40 (DIN EN 60529) |
| Electrical Supply | 230 V, 50/60 Hz |
| Total Input Power | 410 W |
| Control Interface | Touch-sensitive keypad with LED display |
| Operation Modes | Forward/Reverse, Eco Mode, Auto-Low-Temp Preheat, Error Code Indication |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | NANOSTAR 7.5 digital |
| Max. Stirring Volume (H₂O) | 5 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Principle | Brushless DC Motor |
| Speed Display | LED |
| Speed Range | 0/50–2000 rpm |
| Max. Viscosity | 4000 mPa·s |
| Max. Output Power at Shaft | 15.7 W |
| Continuous Duty Cycle | 100 % |
| Max. Torque at Shaft | 7.5 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Chuck Diameter Range | 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.075 N·m |
| Timer Display | None |
| Housing Material | Cast Aluminum Coated / Thermoplastic Polymer |
| Dimensions (W×H×D) | 53 × 147 × 130 mm |
| Weight | 0.8 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (per DIN EN 60529) |
| USB Interface | Yes |
| Supply Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Standby Power Consumption | 0.3 W |
| DC Output | 24 V = |
| Current Draw | 1300 mA |
Show next