- All
- Favorite
- Popular
- Most rated
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | MF/F |
| Drive Type | DC brushless motor with 6-point rotor coupling |
| Heating Method | Steam or recirculating water bath |
| Vacuum Operation Range | Down to 1.33 Pa (10 mTorr) |
| Evaporation Area | 0.04–0.25 m² (glass or SUS316L evaporator sleeves) |
| Condenser Surface Area | 0.3–3.0 m² (multi-layer coiled or triple-coil design) |
| Collection Flask Capacity | 1–20 L (evaporate + concentrate) |
| Max. Feed Viscosity | 1.0–1.5 Pa·s (1000–1500 cP) |
| Rotational Speed Range | 140–1800 rpm (infinitely variable, 50/60 Hz) |
| Evaporation Rate | Up to 40 L/h (steam-heated, F-200 model) |
| Sealing System | Magnetic drive shaft (F-70/F-150), mechanical seal (F-200), vacuum-rated elastomer gasket (MF-10A) |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300S |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Motor | Brushless DC |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Supply | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Dimensions (W×D×H) | 736×352×504 mm (N-1300S-W) / 724×352×504 mm (N-1300S-WB) |
| Weight | 12.1 kg (N-1300S-W) / 12.7 kg (N-1300S-WB) |
| Bath Capacity | 4.3 L (SB-1300, stainless steel SUS304) / 5.4 L (OSB-2200, aluminum with PTFE coating) |
| Sealing | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1100S / N-1100SF |
| Rotation Speed | 20–180 rpm |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | <399.9 Pa (3 mmHg) |
| Bath Temperature Range | RT+5°C to 90°C (N-1100S-W / N-1100SD) or RT+5°C to 180°C (N-1100S-WD) |
| Temp. Control Accuracy | ±1.5°C (water bath, rotating flask) / ±3.0°C (oil bath, rotating flask) |
| Heating Power | 1 kW |
| Condenser | Inclined double-layer coiled tube, cooling area: 0.146 m² |
| Flask Capacity | 1 L pear-shaped (ISO NS29/38) or 500 mL pear-shaped (transparent joint, NS29/38) |
| Receiver | 1 L spherical (ISO S35/20) |
| Shaft Dimensions | ID 18 mm × L 272 mm, TS29/38 |
| Vacuum Seal | Dual-material PTFE/Viton gasket |
| Air Filter | 0.2 µm disk filter (N-1100SD/SFD only) |
| Lift Travel | 100 mm (counterbalanced slide) + 150 mm (manual extension) |
| Bath Dimensions & Capacity | Ø230×100H mm (3 L, water-only) or Ø240×120H mm (5 L, water/oil) |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1210BS-WB |
| Bath Temperature Range | Room Temp. to 180 °C (±1.5 °C in water, ±3 °C in oil) |
| Rotational Speed Range | 5–280 rpm |
| Evaporation Rate (Water) | Up to 25 mL/min |
| Bath Capacity | ~5.4 L |
| Bath Dimensions (ID) | 240 mm × 120 mm H |
| Bath Material | Aluminum with PTFE Coating |
| Heating Power | 1 kW |
| Vertical Travel | Motorized lift 110 mm + manual extension 130 mm |
| Condenser Type | Tilted dual-spiral coil |
| Flask Capacity | 1–3 L (evaporating), 1 L (receiving) |
| Vacuum Seal | PTFE sealing gasket |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Supply | AC 220 V, 5.5 A, 1.2 kVA, 50 Hz |
| Operating Ambient | 5–35 °C |
| Dimensions (W×D×H) | 729 × 433 × 520 mm (750 mm with lift extended) |
| Weight | 18 kg |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | CCX-3200 |
| Tube Capacity | 1–8 (up to 32 with adapter) |
| Reaction Volume per Tube | 0.5–60 mL |
| Temperature Range | RT +10°C to 280°C (max 200°C at 50–60 mL load) |
| Rotation Speed | ~100–1200 rpm (in water) |
| Heating Method | Electric block heater with PID control |
| Stirring Type | High-strength magnetic stirring |
| Condensation Mode | Optional reflux via coolant-split head and condenser |
| Vessel Compatibility | DURAN® borosilicate glass tubes (Φ12–34 mm, 12 sizes, max height 50 mm) |
| Gas Handling | Compatible with Schlenk lines, sealed tubes, pressure-rated vessels, and Dean-Stark traps |
| Dimensions (W×D×H) | 245 × 275 × 800 mm (stand only) |
| Weight | ~8 kg |
| Compliance | Designed for GLP-compliant synthetic laboratories |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | MF-1000 |
| Rotation Speed Range | 100–1200 rpm |
| Max. Evaporation Rate | 760 mL/h (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Type | Vertical double-coil |
| Collection Flask | 1 L spherical flask (S35/20) |
| Condenser & Vacuum Interface | Quick-connect, OD 10 mm × 2 each |
| Wetted Materials | Borosilicate glass, SUS 304 stainless steel, PTFE |
| Dimensions (W×D×H) | 490 × 350 × 930 mm |
| Weight | 17 kg |
| Power Supply | AC 100 V, 50/60 Hz, 2 A, 200 VA |
| Drive Motor | Brushless DC motor |
| Shaft Sealing | Magnetic coupling |
| Bearing | Ceramic lower bearing |
| Stirring Element | Removable PTFE-coated blade with smooth, non-porous surface |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300V |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Power Input | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Heating Power | 1.3 kW |
| Bath Dimensions (SB-1300) | Ø220 × 120 mm H, ~4.3 L (SUS304) |
| Bath Dimensions (OSB-2200) | Ø240 × 120 mm H, ~5.4 L (aluminum with PTFE coating) |
| Weight | 12.8 kg (N-1300V-W) / 13.4 kg (N-1300V-WB) |
| Overall Dimensions | 543 × 352 × 823 mm (W×D×H) |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Sealing Material | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1210BS-WB |
| Capacity | 5.4 L |
| Ultimate Vacuum | 10 hPa (≈7.5 Torr) |
| Rotation Speed | 5–280 rpm |
| Bath Temperature Range | Ambient to 180 °C (±1.5 °C for water, ±3 °C for oil) |
| Evaporation Rate | Max. 25 mL/min (water) |
| Condenser Cooling Area | 0.146 m² |
| Bath Dimensions | Ø240 × 120 mm (H) |
| Power | 1.2 kVA |
| Weight | 18 kg |
| Electrical Supply | AC 220 V, 50 Hz |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | TVE-1100A / TVE-1100B |
| Temperature Range | TVE-1100A: RT + 5°C to 60°C |
| TVE-1100B | RT + 5°C to 40°C |
| Temp. Control Accuracy | ±0.2°C |
| Oscillation Speed | 100–1100 rpm |
| Amplitude | 3 mm |
| Gas Contact Materials | PTFE, Polypropylene, Viton, Silicone Rubber, Borosilicate Glass |
| Vacuum & Vent Ports | OD 10 mm |
| Drain Tube | OD 12 mm |
| Sample Vessel Compatibility | TVE-1100A — Centrifuge Tubes & Test Tubes (Straight, Flip-top, Screw-cap, Standard Tapered Joint) |
| Operating Ambient | 5–35°C |
| Dimensions (W×D×H) | 300 × 500 × 670 mm |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300D |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Motor | Brushless DC |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Input | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Dimensions (W×D×H) | 578×352×645 mm (N-1300D-W) / 565×352×645 mm (N-1300D-WB) |
| Weight | 12.7 kg (N-1300D-W) / 13.3 kg (N-1300D-WB) |
| Bath Capacity | 4.3 L (SB-1300, stainless steel SUS304) / 5.4 L (OSB-2200, aluminum with PTFE coating) |
| Sealing | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-1200AV / N-1200AVF-W / N-1200AVF-WD |
| Rotational Speed | 5–280 rpm |
| Max. Evaporation Rate | 25 mL/min |
| Ultimate Vacuum | < 399.9 Pa (≤ 3 mmHg) |
| Water Bath Temp. Range | RT + 5°C to 90°C |
| Oil/Water Dual Bath Temp. Range | RT + 5°C to 180°C |
| Temp. Control Accuracy | ±1.5°C (water) / ±3°C (oil) |
| Temperature Control Method | Microcomputer-based ON-OFF control |
| Heating Power | 1.05 kW |
| Condenser Type | Vertical double-coil |
| Cooling Surface Area | 0.146 m² |
| Flask Capacity | Standard 1 L (up to 3 L compatible) |
| Bath Dimensions & Volume | Ø240 × 120 mm (shallow zone Ø160 mm), ~5.4 L |
| Lift Stroke | 100 mm (manual rack) + 130 mm (handle extension) |
| Overall Dimensions & Weight | 595 W × 445 D × 700 H mm, 16.5 kg |
| Safety Features | Thermal fuse, dry-run prevention sensor |
| Sealing Material | PTFE vacuum seal |
| Condenser & Flask Joints | Standard taper 29/38 (flask), S35/20 (receiving flask) |
| Shaft | Short-type glass rotary shaft, ID 18 mm × L 178 mm |
| Quick-Connect Fitting | Integrated push-fit interface for chiller hose coupling |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-2100 |
| Bath Temperature Range | Room Temp +5 to 90°C |
| Bath Temp Control Accuracy | ±1°C |
| Rotation Speed | 5–160 rpm |
| Max Evaporation Rate | 43 mL/min (F-type), 23 mL/min (U/R-type) |
| Ultimate Vacuum | 399.9 Pa |
| Condenser Surface Area | 0.25 m² |
| Lift Stroke | 160 mm |
| Bath Dimensions & Capacity | Ø280 × 144 mm, ~8.5 L |
| Flask Capacity | 5 L (round-bottom), 3 L (receiving flask) |
| Joint Standard | S35/20 spherical ground glass |
| Weight | ~29 kg |
| Brand | EYELA (Tokyo Rikakikai) |
|---|---|
| Origin | Japan |
| Model | N-1100V-W/WD |
| Evaporation Capacity | Max. 25 mL/min |
| Rotational Speed | 20–180 rpm |
| Ultimate Vacuum | < 399.9 Pa |
| Bath Temperature Range | Room Temp +5°C to 90°C |
| Heating Control Accuracy | ±0.5°C (typical for PID-controlled water/oil bath) |
| Cooling Surface Area | 0.146 m² |
| Evaporating Flask Capacity | 3 L |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-3100 |
| Rotational Speed Range | 10–140 rpm |
| Max. Evaporation Rate | 3.5 L/h (water) |
| Ultimate Vacuum | 2.6 hPa |
| Bath Temperature Range | Ambient +10°C to 180°C (±1°C in water, ±3°C in oil) |
| Heating Power | 3.5 kW |
| Temperature Control | PID |
| Vacuum Control Modes | Setpoint, Auto, Program, Pressure-Step |
| Bath Dimensions & Capacity | Φ360 × 200 mm, ~20 L |
| Bath Material | SUS304 stainless steel |
| Condenser | Vertical triple-coil, 0.5 m² cooling surface |
| Flask Capacity | 10 L spherical (neck Ø100 mm) |
| Collection Flask | 5 L spherical with drain valve |
| Sealing | PTFE mechanical seal |
| Lift Stroke | 145 mm (motorized) |
| Motor | Induction type, 60 W |
| Cooling/Inlet Port Diameter | 16 mm (×2), Solenoid Valve Port: 13 mm |
| Ambient Operating Range | 5–35°C |
| External Dimensions (W×D×H) | 930 × 480 × 1890 mm |
| Weight | ~96 kg |
| Power Supply | AC 200 V, 19 A, 3.8 kVA |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-1200BV |
| Rotational Speed | 5–280 rpm |
| Max. Evaporation Rate | 25 mL/min |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Water Bath Temp. Range | RT +5 to 90°C |
| Oil/Water Dual Bath Temp. Range | RT +5 to 180°C |
| Temp. Control Accuracy | ±1.5°C (water), ±3°C (oil) |
| Heating Power | 1.05 kW |
| Condenser Type | Vertical double-coil |
| Cooling Surface Area | 0.146 m² |
| Flask Capacity | Standard 1 L (max 3 L), Pear-shaped, JIS Standard Taper 29/38 |
| Collection Flask | 1 L spherical, S35/20 ground joint |
| Rotary Shaft | Short-type glass shaft, Ø18 mm × 178 mm, JIS 29/38 |
| Sealing Material | PTFE vacuum seal |
| Bath Dimensions & Volume | Ø240 mm (upper) / Ø160 mm (lower) × 120 mm depth, ~5.4 L |
| Lift Stroke | 100 mm (motorized) + 130 mm (manual extension) |
| Overall Dimensions & Weight | 595 W × 445 D × 700 H (930 mm with lift extended) mm, 17.5 kg |
Show next