- All
- Favorite
- Popular
- Most rated
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Q-SUN Xe-1 / Xe-3 / B02 |
| Xenon Lamp Power | 1800 W |
| Temperature Range | Ambient to 85 °C (operational, dependent on irradiance and humidity settings) |
| Humidity Range | 10–95% RH (controlled, model-dependent) |
| Lamp Life | ~1500 hours |
| Cooling Method | Air-cooled |
| Filter Types | Daylight, Window Glass, Extended UV |
| Compliance | ASTM G155, ISO 4892-2, SAE J2527, AATCC TM16, ISO 105-B02, GB/T 16422.2 |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Xe-3 |
| Light Source | Air-Cooled Xenon Arc Lamp (3 Lamps) |
| Spectral Filtering Options | Daylight, Window Glass, Extended UV |
| Irradiance Control | 0.35–0.55 W/m² @ 340 nm (adjustable) |
| Temperature Range | 10–90 °C (operational, chamber air) |
| Humidity Range | 10–95% RH (non-condensing), programmable |
| Sample Capacity | Flat-panel or 3D specimens on sliding tray |
| Compliance | Fully engineered to meet ASTM G155, ISO 4892-2, SAE J2527, AATCC TM16, and GB/T 16422.2 |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | CR-10 |
| Calibration Traceability | NIST |
| Accreditation | ISO/IEC 17025 (A2LA & UKAS) |
| Recommended Recalibration Interval | Annually |
| Compatible With | QUV Accelerated Weathering Testers (UV-A and UV-B lamp configurations) |
| Excludes | QUV Basic, QUV/cw (requires CR-10/cw), Q-SUN (requires CR-20 series) |
| Brand | Specim (a Konica Minolta company) |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Specim IQ |
| Pricing | Available upon Request |
| Operating Principle | Push-broom scanning |
| Deployment Mode | Ground-based |
| Spectral Range | 400–1000 nm |
| Spatial Resolution | 512 × 512 pixels |
| Detector Type | CMOS-based line-scan sensor |
| Spectral Sampling | ~2.7 nm per band (approx. 204 spectral bands) |
| Onboard Processing | ARM Cortex-A9 dual-core CPU with FPGA acceleration |
| Storage | Internal 64 GB eMMC + removable microSD card (UHS-I) |
| Battery Life | Up to 90 minutes continuous operation (rechargeable Li-ion) |
| Environmental Rating | IP54 (dust- and splash-resistant) |
| Connectivity | USB 3.0, Wi-Fi 802.11n (2.4 GHz), Bluetooth 4.2 |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | mzr-pump |
| Drive | Electric |
| Speed Range | 0–300 rpm |
| Flow Rate | 1 µL/h – 1.1 L/h |
| Pressure Capability | Up to 150 bar |
| Viscosity Range | 0.3 – 1,000,000 mPa·s |
| Pulse Level | <1% (RMS) |
| Dead Volume | <1 µL |
| Materials | Chemically resistant stainless steel, ceramic, PTFE, sapphire |
| Explosion-Proof Options | Available (ATEX/IECEx compliant) |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | CRH600-HSC |
| Salt Spray Deposition Rate | 0.5–3 mL/h·80 cm² |
| Temperature Range | Ambient to 70 °C |
| Chamber Capacity | 640 L |
| Humidity Control | Yes (RH 10–95% RH, ramp rate programmable) |
| Optional Features | Spray Module, Nozzle Auto-Cleaning System, Preconditioned Air Humidification |
| Compliance | ASTM B117, ISO 9227, GMW 14872, SAE J2334, Ford CETP, VW PV1210, Renault D17 2027, GB/T 10125, ISO 16701, Prohesion™ |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-3 |
| Xenon Lamp Power | 1800 W |
| Light Spectrum | Full-spectrum solar simulation (290–800 nm) |
| Temperature Control | Black Standard/Black Panel Thermometer (BST/BPT) |
| Humidity Control | Precise RH control (range: 10–95% RH, typical operating range) |
| Water Spray System | Deionized water spray with programmable timing (light/dark cycles) |
| Irradiance Control | Closed-loop feedback at 340 nm, 420 nm, or TUV band |
| Filter Options | Daylight-Q/B, Window Glass-Q, Extended UV-Q |
| Lamp Life | Approx. 1500 hours |
| Compliance | ASTM G155, ISO 4892-2, AATCC TM16, SAE J2527, ISO 105-B02, ASTM D4355, ASTM D4459, ASTM D6551, and others |
| Brand | Defelsko |
|---|---|
| Origin | USA |
| Model | PosiTector 200 |
| Measurement Range (B/S) | 13–1000 µm |
| Measurement Range (C/A) | 50–3800 µm |
| Accuracy | ±(2 µm + 3% of reading) |
| Total Thickness Measurement | Yes |
| Layered Thickness Measurement | B/A & C/A models only |
| Waveform Display | B/A & C/A models only |
| Compliance | ISO 2808, ASTM D6132 |
| Calibration | NIST-traceable certificate supplied with each unit |
| Data Storage | 10,000 readings across 1,000 groups |
| Environmental Rating | IP5X |
| Display | Backlit LCD with multi-language support (including Chinese) |
| Software Compatibility | PosiSoft for Windows |
| Optional Accessories | Infrared printer |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | CCT1100 |
| Chamber Type | Cyclic Corrosion Test Chamber |
| Core Functions | Salt Spray / Dry / High-Humidity (100% RH) Cycling |
| Compliance | ASTM B117, ASTM G85 Annex A5 (Prohesion), ISO 9227, ISO 11997, SAE J2334, GMW 14872, Ford CETP 00.00-L-467, VW PV1210 |
| Control System | Integrated Q-FOG Microprocessor Controller with Real-Time Display and Programmable Cycle Sequencing |
| Chamber Volume | 1100 L (Standard Configuration) |
| Construction | Fiberglass-Reinforced Polymer (FRP) Cabinet with Corrosion-Resistant Interior |
| Humidity Generation | Electric Steam Generator |
| Salt Fog Delivery | Compressed-Air-Driven Atomization via Bubble Tower (except Prohesion mode) |
| Temperature Control | Dual-Heater System (Chamber + Air Stream) |
| Viewing Window | Polycarbonate Side Window with Sealed Gasket |
| Data Logging | Onboard Event Timestamping (Start/Stop/Phase Transition), Optional USB Export |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | QUV Accelerated Weathering Tester |
| Price | Upon Request |
| UV Wavelength Range | 280–340 nm |
| Sample Chamber Dimensions (L×W×H) | Available Upon Request |
| Illumination Temperature Range | Available Upon Request |
| Black Panel Temperature Range | Available Upon Request |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | QUV/spray |
| Exposure Time Range | 1–5000 h |
| Irradiance Control | 10 W/m² (UVA-340 calibrated) |
| UV Lamp Options | UVA-340, UVB-313, Cool White |
| Condensation Temperature Range | 40–60 °C |
| Irradiation Temperature Range | 45–80 °C |
| Sample Capacity | 48 specimens (75 × 150 mm) |
| Power Supply | 120 V/60 Hz, 20 A or 230 V/50–60 Hz, 9 A |
| Water Consumption | 8 L/day (spray mode) |
| Compliance | ASTM G154, ISO 4892-3, SAE J2020, GB/T 14522, JIS D0205 |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-1 |
| Xenon Lamp Power | 1800 W |
| Irradiance Control | 1.3 W/m² @ 340 nm |
| Light Exposure Duration | Up to 1500 h per cycle |
| Humidity Control | Optional with water spray system |
| Cooling Option | Available with integrated refrigerated cooling unit |
| Compliance | ISO 4892-2, ASTM G155, SAE J2527, AATCC TM16, ISO 11341, IEC 60068-2-9 |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | QUV |
| UV Wavelength Range | 295–400 nm (UVA-340: 295–365 nm |
| UVB-313 | 280–360 nm) |
| Sample Capacity | 48 specimens (75 mm × 150 mm) or 24 specimens (75 mm × 300 mm) |
| Black Panel Temperature Range | 30–80 °C (adjustable, ±0.5 °C stability) |
| Condensation Humidity Control | 100% RH via water condensation cycle |
| Irradiance Control | Closed-loop solar-eye® sensor with CR-10 traceable calibration |
| Lamp Lifetime | 5,000 hours (warranty-backed) |
| Compliance | ASTM G154, ISO 4892-3, SAE J2020, GB/T 14522, IEC 61215 (UV pre-conditioning), FDA 21 CFR Part 11 ready (with optional software) |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | QUV/spray |
| UV Wavelength Range | 280–400 nm |
| Illumination Temperature Range | 45–80 °C |
| Condensation Temperature Range | 40–60 °C |
| Chamber Capacity | 48 standard specimens (75 mm × 150 mm) |
| Irradiance Control Point | 340 nm |
| Adjustable Irradiance Range | 0.25–1.80 W/m² @ 340 nm |
| Irradiance Display Accuracy | ±0.01 W/m² |
| Lamp Types | UVB-313EL, UVA-340, UVA-351 |
| Lamp Lifetime | Up to 5000 hours |
| Compliance Standards | ASTM G151, ASTM G154, ISO 4892-3, SAE J2020, GB/T 5237.2, HG/T 2454-2006, HG/T 3828-2006 |
| Power Supply | 230 V / 50 Hz, 1500 W (max) |
| Dimensions (W×D×H) | 137 × 53 × 135 cm |
| Weight | 136 kg |
| Water Consumption | Condensation — ~8 L/day (deionized water) |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-1-B |
| Xenon Lamp Power | 1800 W |
| Humidity Range | 25–80 %RH |
| Cabinet Type | Benchtop, Single-Lamp, Air-Cooled Xenon Arc Chamber |
| Compliance | ASTM G155, ISO 4892-2, IEC 60068-2-9, SAE J2527, AATCC TM16, GB/T 16422.2 |
| Control System | SOLAR EYE® Irradiance Feedback Control (340 nm, 420 nm, or TUV band selectable) |
| Black Panel Temperature Sensor | CT202-calibrated |
| Interface Languages | English, Spanish, French, German, Chinese |
| Data Logging | Ethernet-enabled real-time data acquisition |
| Brand | Taber |
|---|---|
| Origin | USA |
| Model | 150-E |
| Measurement Range | 0–10,000 Taber Stiffness Units (g·cm) |
| Compliance | CE Marked |
| Power Supply | 115/230 VAC, 50/60 Hz |
| Display | 4×20 Vacuum Fluorescent Display |
| Data Storage | 1,000 readings with timestamp & user-defined labels |
| Interface | RS-232 serial port, parallel printer port |
| Test parameters programmable | deflection angle, direction, cycle count |
| Accuracy | ±1% full scale (factory calibrated) |
| Sample thickness range | 0.1–5.5 mm |
| Brand | Warren Rupp |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | UL Series |
| Pricing | Upon Request |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-11507 |
| Flow Rate | 58–1152 mL/min |
| Speed Range | 300–6000 rpm |
| Precision (CV) | <1% |
| Max Differential Pressure | 40 bar (at 1 mPa·s), 80 bar (≥16 mPa·s) |
| Viscosity Range | 0.3–5,000 mPa·s (up to 10,000 mPa·s with optional configuration) |
| Displacement per Revolution | 192 µL |
| Minimum Dose Volume | 100 µL |
| Motor | 3-phase AC, 250 W, IEC 063, IP55, 240/400 V, 50 Hz |
| Wetted Materials | SS 316L (1.4435), Tungsten Carbide, Alloy C276 (2.4819), Graphite-Reinforced PTFE, FPM (optional EPDM/FFPM) |
| Connection | 3/8" NPT female (lateral option available) |
| Dimensions (L×W×H) | 358 × 120 × 224 mm |
| Weight | ~22 kg |
| Ambient Temp | −20 to +40 °C (−55 to +60 °C with options) |
| Operating Temp | −5 to +40 °C (−20 to +120 °C with options) |
| ATEX Certification | II 2G c T4 X (Zone 1 & 2) |
| Thermal Protection | 6-piece PTC thermistor array |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-LAB Xe-1-SC |
| Xenon Lamp Power | 1800 W |
| Temperature Range | 19–103 °C (with chiller option) |
| Humidity Control | Optional |
| Water Spray System | Integrated dual-nozzle spray, programmable in light/dark cycles |
| Lamp Type | Air-cooled single xenon arc lamp |
| Lamp Lifetime | ~1500 hours |
| Spectral Output | Full-spectrum solar simulation (UV–VIS–NIR) |
| Compliance | ASTM G155, ISO 4892-2, SAE J2527, AATCC TM16, ISO 11341 |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | QUV/se |
| Sample Capacity | 24 pcs (75 mm × 300 mm) or 48 pcs (75 mm × 150 mm) |
| UV Irradiance Control | Yes (Solar Eye® feedback system) |
| Condensation Simulation | Yes |
| Compliance | ASTM G154, ISO 4892-3, JIS K 5600-7-8, SAE J2020, GB/T 14522, and other international standards |
| Chamber Dimensions (L×W×H) | As specified in technical documentation |
| Black Panel Temperature Range | As specified in technical documentation |
| UV Wavelength Range | UVA-340 (315–400 nm) or UVB-313 (280–315 nm), configurable per lamp type |
| Illumination Uniformity | ±15% across specimen plane per ASTM G154 Annex A1 |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Xe-3-H |
| Lamp Configuration | Triple-air-cooled xenon arc lamps |
| Humidity Control | Yes, with programmable relative humidity (RH) range |
| Temperature Control | Yes, with black panel and chamber air temperature monitoring |
| Compliance | ASTM G155, ISO 4892-2, SAE J2527, AATCC TM16, ISO 11341, DIN 75220, BS EN ISO 105-B02 |
| Software Interface | Q-Lab’s Windows-based Q-Sun Software v5.0 with Ethernet data logging, audit trail, and multi-language support (EN/FR/ES/IT/DE) |
| Calibration | AUTO-CAL™ automated irradiance calibration system |
| Lamp Life Warranty | 1500 hours |
| Continuous Operation | 24/7 capability |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-2 |
| Xenon Lamp Power | 1800 W |
| Configuration | Rotating Drum Sample Holder |
| Humidity Control | Yes |
| Water Spray Function | Optional (Xe-2-HS) |
| Compliance | ASTM G155, ISO 105-B02/B04/B06, AATCC TM16, ISO 4892-2, JIS D0205, GB/T 8427 |
| Brand | VMA |
|---|---|
| Origin | Germany |
| Model | CN80 |
| Power | 7.5 kW |
| Max Speed | 3000 rpm |
| Max Torque | 50 N·m |
| Volume Range | 10–120 L |
| Drive Type | Electromechanical, Height-Adjustable Stand |
| Compliance | Machinery Directive 2006/42/EC |
| Optional Milling Systems | Five interchangeable dispersion systems (CN10–CN100) |
| Viscosity Capability | Up to non-flowing, high-viscosity pastes (with ASC scraper system) |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | QUV |
| Illumination Temperature Range | 35–80 °C |
| Black Panel Temperature Range | 35–80 °C |
| UV Wavelength Range | 320–420 nm |
| Chamber Dimensions (L×W×H) | 137 × 53 × 135 cm |
| Compliance | ISO 9000, ASTM G154, ISO 4892-3, IEC 61215, SAE J2020, AATCC TM186 |
| Lamp Type | UVA-340 or UVB-313 fluorescent lamps |
| Standard Sample Capacity | 48 × 75 mm × 150 mm specimens |
| Irradiance Control | CR-10 radiometer (traceable to NIST) |
| Power Supply | 120/230 V, 50/60 Hz, up to 1800 W |
| Water Consumption | 8 L/day (condensation), 7 L/min (spray) |
Show next