- All
- Favorite
- Popular
- Most rated
| Brand | Kipp&Zonen |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Solys2 |
| Power Input | 24 VDC or 90–264 VAC |
| Operating Temperature Range | -40 °C to +50 °C (with AC-powered heater) |
| Payload Capacity | ≤20 kg |
| Positioning Accuracy | <0.02° RMS |
| Communication Interfaces | Ethernet, RS-232, RS-485 |
| Integrated GPS | Yes, for autonomous latitude/longitude/time synchronization |
| Sun Sensor Option | Available for closed-loop active tracking |
| Enclosure | Cast aluminum, IP65-rated, tripod-mounted with leveling feet |
| Drive System | Maintenance-free toothed belt transmission |
| Mounting | Top plate supports up to three Kipp&Zonen pyrheliometers or pyranometers |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Imported |
| Model | SGR4 |
| Output Interface | Modbus® RS-485 & Enhanced Analog |
| Power Supply | 5–30 VDC |
| Field of View | 180° (Hemispherical) |
| Dome Material | Hard Carbon-Coated Silicon Dome |
| Thermal Stability | Dome-to-body coupling eliminates need for dome temperature measurement or shading |
| Desiccant Lifetime | ≥10 years |
| Warranty | 5 years |
| Optional Integration | CVF4 Ventilation Unit |
| Compliance | ISO 9060:2018 Class C (for pyrgeometers), WMO Guide to Instruments and Methods of Observation (CIMO) |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | DustIQ |
| Power Supply | 12–24 V DC, 300 mA |
| Communication | RS-485 Modbus® RTU |
| IP Rating | IP67 |
| Cable Options | Standard 10 m UV-resistant cable (8-pin connector), optional 25 m or 50 m |
| Operating Temperature | –40 °C to +70 °C |
| Calibration | Factory-calibrated for glass surface soiling |
| Brand | Kipp&Zonen |
|---|---|
| Origin | Imported |
| Model | RaZon+ |
| Measurement Outputs | Global Horizontal Irradiance (GHI), Direct Normal Irradiance (DNI), Diffuse Horizontal Irradiance (DHI), Sunshine Duration, Solar Zenith & Azimuth Angles, System Status |
| Data Logging Interval | ~1-minute Averaging |
| Communication Interfaces | RS-485, Ethernet, Wi-Fi, Optional 3G/4G Modem |
| Mounting Options | Tripod or Pole-Mounted |
| Compliance | IEC 61724-1:2021, ISO 9078, ASTM G167, WMO Guide to Meteorological Instruments and Methods of Observation |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | CHP1 |
| Price | Upon Request |
| Brand | Kipp&Zonen |
|---|---|
| Origin | Netherlands (manufactured in Delft) |
| Model | LAS MkII |
| Measurement Path Length | 100 m to 4.5 km |
| Integrated Data Logger | Yes |
| Onboard Digital Signal Processing | Yes |
| Cn² and Sensible Heat Flux Output | Standard (with optional meteorological sensor kit) |
| Power Supply | Low-power DC (solar-compatible, typically 12 V) |
| Display & Keypad | Built-in monochrome LCD with membrane keypad |
| Communication Interfaces | RS-232, RS-485, SDI-12, Analog Outputs (0–5 V or 4–20 mA) |
| Software | EVATION® v3.x (real-time visualization, post-processing, export to CSV/NetCDF) |
| Brand | Kipp & Zonen |
|---|---|
| Model | CNR4 |
| Measurement Principle | Four-Component Thermopile-Based Net Radiometry |
| Sensor Integration | Integrated 10 kΩ Thermistor and Pt-100 Temperature Sensors |
| Optional Accessories | Solar Radiation Shield, Heater-Ventilation Unit (HVU) for Fouling Mitigation |
| Compliance | ISO 9060:2018 (Secondary Standard), WMO Guide to Meteorological Instruments and Methods of Observation |
| Brand | Kipp&Zonen |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | SGR3 |
| Pricing | Available Upon Request |
| Brand | Kipp & Zonen |
|---|---|
| Model | Brewer MkIII |
| Optical Design | Dual Monochromator |
| Wavelength Range | 286–363 nm (Ozone & SO₂ measurement bands) |
| Stray Light Rejection | <1×10⁻⁷ (typical) |
| Tracking System | Dual-axis solar tracker with azimuth/elevation control |
| Data Acquisition | PC-controlled via RS-232/USB, 24/7 unattended operation capable |
| Compliance | Meets WMO/GAW requirements for total ozone and UV spectral irradiance monitoring |
| Software | GW-Basic v3.75f (Kipp & Zonen validated, firmware-integrated) |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Imported |
| Model | CM4 |
| Operating Temperature Range | -40 °C to +150 °C |
| Irradiance Measurement Range | 0 to 4000 W/m² |
| Spectral Range | 305–2800 nm |
| Response Time (95%) | < 5 s |
| Nonlinearity | < ±0.5 % of reading |
| Zero Offset (Thermal, 5 K/h) | < ±5 W/m² |
| Tilt Dependence | < ±1 % (0–90°) |
| Calibrated Against ISO 9060 | 2018 Secondary Standard |
| Brand | Kipp&Zonen |
|---|---|
| Origin | Imported |
| Model | SMP |
| Power Supply | 5–30 VDC (with reverse polarity & overvoltage protection) |
| Output Interface | Modbus RTU over RS-485 |
| Maximum Devices per Network | 247 (via unique Modbus addressing) |
| Data Update Rate | ~1 Hz |
| Resolution | 24-bit differential analog-to-digital conversion |
| Temperature Compensation | Integrated thermistor + polynomial correction algorithm |
| Spectral Range | 305–2800 nm |
| Directional Response Compliance | ISO 9060:2018 Class A (Secondary Standard) |
| Calibration Traceability | NIST-traceable, with full calibration history stored onboard |
| Brand | Kipp&Zonen |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Solys Gear Drive |
| Power Input | 24 VDC / 100–240 VAC dual-input |
| Operating Temperature Range | –50 °C to +60 °C (with sunshade) |
| Max Payload Capacity | < 80 kg |
| Tracking Accuracy | ≤ ±0.02° (typical, under nominal conditions) |
| Integrated GPS | Yes, auto-configures latitude, longitude, and UTC time |
| Communication Interface | Ethernet (RJ45), status LED indicators |
| Drive Mechanism | Maintenance-free high-efficiency timing belt transmission |
| Enclosure Material | Die-cast aluminum housing with optional dual side panels |
| Mounting Options | Adjustable tripod with leveling feet, top mounting plate for pyrheliometer integration |
| Heating System | Built-in heater (AC-powered) for sub-zero operation |
| Compliance | Designed per IEC 61724-1 (Photovoltaic system performance monitoring), compatible with ISO 9087, ASTM G167, and WMO Guide to Meteorological Instruments and Methods of Observation |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | SHP1 |
| Pricing | Upon Request |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | CGR4 |
| Pricing | Upon Request |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Rt1 |
| Output Interface | RS-485 Modbus® |
| Signal Cable | Pre-terminated 20 m shielded cable with IP68 waterproof connector |
| Compliance | ISO 9847 Annex A.3 (Field Calibration of Pyranometers by Comparison with Reference Instruments) |
| Operating Principle | Thermopile-based broadband solar irradiance measurement (285–3000 nm) |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | CMP Series |
| Output Signal | ~10 mV per 1000 W/m² (typical) |
| Calibration | Individually calibrated with traceable certificate |
| Power Requirement | None (passive thermopile sensor) |
| Desiccant Life | ≥10 years (CMP3/CMP10 integrated) |
| Compliance | ISO 9060:2018 Class C (formerly Secondary Standard),符合WMO Guide to Meteorological Instruments and Methods of Observation |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SP Lite2 |
| Measurement Principle | Silicon Photodiode-based Solar Irradiance Detection |
| Spectral Range | 400–1100 nm |
| Sensitivity | Approx. 10 µV per W/m² |
| Output Signal | Analog Voltage (0–10 mV or 0–5 V optional) |
| Operating Temperature | −40 °C to +80 °C |
| Response Time | < 1 s (95 %) |
| Zero Offset (Thermal) | < ±5 W/m² |
| Non-linearity | < ±1 % (0–1000 W/m²) |
| Tilt Error | < ±1 % (0–90° tilt, 1000 W/m²) |
| IP Rating | IP67 |
| Cable Length | 5 m standard (custom lengths available) |
| Calibration Traceability | NIST-traceable calibration certificate included |
| Brand | Kipp&Zonen |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | CGR3 |
| Pricing | Upon Request |
Show next