- All
- Favorite
- Popular
- Most rated
| Brand | Sea-Bird Scientific |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Hydro-T |
| Measurement Range | –5 to 45 °C |
| Initial Accuracy | ±0.002 °C |
| Typical Stability | <0.002 °C/year |
| Resolution | 0.0001 °C |
| Clock Accuracy | ±5 seconds/month |
| Battery | Saft LS14500 3.6 V Li-SOCl₂ (hazard-free) |
| Sampling Capacity | 15.9M samples |
| Max Deployment Duration | Up to 2 years (dependent on sampling interval) |
| Housing Material | Engineering-grade polymer |
| Pressure Rating | 1500 m (4900 ft) |
| Weight | 0.2 kg (air), 0.05 kg (water) |
| Calibration | 11-point NIST-traceable calibration in SBE’s ISO/IEC 17025-accredited thermal calibration bath |
| Brand | Hach |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Instrument Type | Portable |
| Measurement Principle | Ion-Selective Electrode (ISE) |
| Sensor Architecture | Integrated CARTRICAL Cartridge with pH, Temperature, and Selective Electrodes |
| Calibration | Factory-Calibrated Cartridge |
| Maintenance Interval | ~2x per year (typical operation) |
| Sample Handling | No pretreatment required |
| Controller Compatibility | SC100 / SC200 / SC1000 Digital Controllers |
| Housing Material | Stainless Steel Body with Ryton End Caps |
| Immersion Rating | Fully Submersible |
| Mounting Options | Rod, Chain, or Wall-Mount Kits |
| Key | Brand: HACH |
|---|---|
| Model | 9123 |
| Origin | Imported |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Pricing | Available upon Request |
| Brand | HACH |
|---|---|
| Model | APA6000 |
| Measurement Principle | Automated titration pump coupled with colorimetric detection |
| Range (Low) | 0.05–2.0 mg/L Cu²⁺ |
| Range (High) | 1.0–10.0 mg/L Cu²⁺ |
| Accuracy (Low) | ±3% or ±0.03 mg/L (whichever is greater) |
| Accuracy (High) | ±5% or ±0.05 mg/L (whichever is greater) |
| Resolution | 0.001 ppm |
| Repeatability | ±3% of reading or <±0.03 mg/L (whichever is greater) |
| Cycle Time | ~4 minutes per analysis |
| Display | Digital and graphical output calibrated to Cu²⁺ concentration |
| Sample Flow Rate | 20–1000 mL/min |
| Operating Temperature | 5–50 °C |
| Relative Humidity | ≤95% RH, non-condensing |
| Inlet Pressure | 0.17–6.9 bar |
| Calibration Frequency | Configurable from twice daily to once weekly (calibration duration: ~35 min) |
| Analog Outputs | Two isolated 4–20 mA outputs |
| Alarm Outputs | Two SPDT relays |
| Power Supply | 95–240 VAC, 50/60 Hz |
| Enclosure Rating | NEMA 4X (IP65) |
| Mounting Options | Panel-mount, benchtop, or wall-mount (hardware included) |
| Data Storage | 30-day onboard history with trend and graphical analysis capability |
| Maintenance Interval | Up to 30 days unattended operation |
| Brand | Hach |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Instrument Type | Portable |
| Measurement Principle | Coulometric Titration (Acidic/Alkaline KMnO₄ Method) |
| Measurement Range | 0–5000 mg/L as O₂ |
| Accuracy | ±2% of full scale |
| Repeatability | ±2% of full scale |
| Detection Limit | 0.2 mg/L |
| Typical Analysis Time | 15 minutes |
| Batch Capacity | Single-sample per run |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Status | Manufacturer |
| Model | Anatel PAT700 |
| Measurement Range | 0.5–2,000 ppb C TOC |
| Repeatability | ±0.3 ppb or ±1% (whichever is greater) |
| Accuracy | ±1 ppb or ±5% (whichever is greater) |
| TOC Resolution | 0.1 ppb |
| Conductivity/Resistivity Resolution | 0.01 µS/cm or MΩ·cm |
| Temperature Resolution | 0.1 °C |
| Conductivity Compensation | Temperature-compensated and non-temperature-compensated modes |
| Inlet Pressure | 10–100 psig (69–690 kPa) |
| Flow Rate | 60–300 mL/min |
| Analog Outputs | Three 4–20 mA |
| Digital I/O | Two digital inputs, four digital outputs |
| Communication Interfaces | RS232, USB, Ethernet, Serial printer port |
| Brand | Hach |
|---|---|
| Origin | USA |
| Manufacturer | Hach Company |
| Product Type | Imported Instrument |
| Model | HQd Series |
| Pricing | Available Upon Request |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Status | Original Equipment Manufacturer (OEM) |
| Model | 3650EX |
| Power Supply | 2 × AA NiCd or alkaline batteries (2.4–3 V DC) |
| Battery Life | Up to 40 hours continuous operation |
| Measurement Principle | Electrochemical amperometric sensing with proprietary membrane-based sensor |
| Enclosure Rating | IP67 / NEMA 4X |
| Certification | ATEX II 1G Ex ia IIC T4 Ga |
| Temperature Range | –5 °C to +100 °C |
| Output Interface | RS-232 serial digital interface |
| Zero Drift | < 0.5 % FS per 24 h |
| Housing Material | Fully stainless steel (316L) |
| Data Logging | Internal non-volatile memory with PC download capability |
| Brand | Hach |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Model | TitraLab AT1000 |
| Titration Types | Potentiometric (zero-current or controlled-current), Amperometric, Colorimetric |
| Titration Modes | Sample, Blank, Sample + Blank, QC Sample, QC Sample + Blank |
| Measured Parameters | mV/pH, Conductivity, Temperature |
| Resolution | mV/pH: ±0.1 mV / ±0.001 pH |
| Conductivity | ±0.5% of reading |
| Temperature | ±0.3 °C / ±0.51 °F |
| Sample Holder | Integrated design with magnetic stirring |
| max. beaker capacity | 250 mL |
| Electrode Inputs | Dual-channel |
| Burette Capacities | 2.5 / 5 / 10 / 25 mL (ISO 8655-3 compliant) |
| Motor Resolution | 20,000 steps with microstepping (128 μsteps/step) |
| Calibration Modes | Electrode & titrant calibration — automatic, fixed-point, or user-defined (up to 5 points) |
| Calibration Scheduling | Configurable interval-based alerts and reminders |
| Data Storage | Last 100 measurements (samples, blanks, QC samples) + last 10 calibrations, including timestamp, operator ID, sample ID |
| Data Export | USB drive |
| Interface | 5.7" color VGA touchscreen |
| Calibration Curve Display | Direct or derivative plots |
| Connectivity | 2× electrode ports, 2× USB, 1× RS-232, 1× Ethernet |
| Dimensions (H×W×D) | 220 × 400 × 360 mm |
| Weight | 4 kg |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Operating Environment | 15–35 °C, 20–80% RH (non-condensing) |
| Storage Range | −5–40 °C |
| Safety Certification | IEC/EN 61010-1 |
| EMC Compliance | IEC/EN 61326-1 |
| Brand | Hach |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Application | Laboratory Use |
| Measured Parameter | Total Phosphorus |
| Measurement Principle | Acidic Persulfate Digestion + Ammonium Molybdate Colorimetry at 880 nm |
| Measurement Range | 0.01–3.8 mg/L as PO₄–P |
| Accuracy | <2% at 1 mg/L |
| Detection Limit | 0.01 mg/L |
| Resolution | 0.001 mg/L |
| Sample pH Range | 2–10 |
| Digestion Conditions | 150 °C, 6 bar |
| Particle Tolerance | Up to 100 µm |
| Calibration Method | Single- or Multi-point |
| Auto-sampler Options | 36-position (with stirring) or 53-position (without stirring) |
| Display | Color LCD |
| Weight | 40 kg (digestion/analysis unit), 5 kg (auto-sampler) |
| Brand | Hach |
|---|---|
| Origin | USA |
| Manufacturer | Hach Company |
| Product Type | Imported |
| Model | CL17D Residual and Total Chlorine Analyzer – Distribution Network Version |
| Instrument Type | Online Analyzer |
| Measurement Principle | DPD Colorimetric Method (N,N-Diethyl-p-phenylenediamine) |
| Measured Parameter | Residual Chlorine / Total Chlorine |
| Range | 0–5 mg/L as Cl₂ |
| Accuracy | ±5% or ±0.005 mg/L as Cl₂ (whichever is greater) |
| Repeatability | ±0.035 mg/L or ±5% as Cl₂ (whichever is greater) |
| Detection Limit | 0.035 mg/L as Cl₂ |
| Sample Temperature Range | 5–40 °C |
| Cycle Time | 10 minutes |
| Analog Output | 4–20 mA (configurable across 0–5 mg/L range) |
| Alarm Outputs | Two user-configurable concentration alarms, each with SPDT relay (5 A, 230 VAC) |
| Dimensions | 42 × 32 × 18 cm |
| Turbidity & Color Compensation | Automatic |
| Calibration | Built-in calibration curve |
| Diagnostic Capability | Self-diagnostic system |
| Reagent Lifetime | Up to 120 days (unopened) |
| Brand | Trojan |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | TrojanUVSigna |
| Pricing | Available Upon Request |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Model | CA9400 Single-Channel / Dual-Channel Transmitter |
| Pricing | Available Upon Request |
| Brand | HACH |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | Eclox |
| Instrument Type | Portable |
| Biological Indicator | *Aliivibrio fischeri* (freeze-dried, ISO 11348-compliant) |
| Operating Temperature Range | −20 °C to +55 °C |
| IP Rating | IP67 |
| Weight | 1.4 kg (instrument only, with batteries) |
| Dimensions | 230 × 77 × 125 mm (instrument) |
| Power Supply | 4 × AA alkaline batteries (≥250 tests per set) |
| Display | Backlit graphical LCD |
| Data Storage | 32 KB non-volatile memory |
| Interface | RS232 serial output |
| Measurement Time | Default 15 s (configurable: 6–20 s) |
| Toxicity Screening Range | 0–100% inhibition (linear response: 10–90%) |
| Screening Assay Duration | 5, 15, or 30 min |
| Certification | CE Marked |
| Bacterial Reagent Storage | −18 °C (12 months) |
| Reagent Shelf Life | Chemical luminescence reagents — 24 months at room temperature |
| Additional Onboard Parameters | Residual chlorine, total chlorine, arsenic (colorimetric), pH, conductivity (TDS), platinum-cobalt color, organophosphate nerve agents, carbamate insecticides |
| Brand | HACH |
|---|---|
| Origin | USA |
| Manufacturer | HACH Company |
| Product Type | Imported Instrument |
| Model | Polymetron 9210 |
| Pricing | Upon Request |
| Measurement Range | 0–1000 ppb or 0–5000 ppb SiO₂ |
| Repeatability | ±0.5 ppb / ±2 ppb |
| Detection Limit | <0.5 ppb / <2 ppb |
| Cycle Time | 10 min per channel |
| Operating Pressure | 0.2–2 bar |
| Operating Temperature | 5–50 °C |
| Sample Flow Rate | 15–20 L/h |
| Communication Interface | RS-485 |
| Analog Output | 4–20 mA |
| Channel Capacity | 1–6 channels |
| Calibration | Dual-point (chemical zero & slope) |
| Data Logging | Integrated memory with timestamped records |
| User Interface | Graphical menu with intuitive navigation |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Measurement Principle | Coulometric Titration with Acidic Potassium Permanganate Oxidation |
| Range | 0–20 / 40 / 100 / 200 / 400 / 1000 mg/L as O₂ |
| Repeatability | ±2% RSD |
| Accuracy | ±5% of reading |
| LOD | 0.4 mg/L |
| Resolution | 0.01 mg/L |
| Single-Test Duration | 5–10 min |
| Data Storage | 100 test records |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer | HACH Company |
| Model | Amtax™ Compact |
| Instrument Type | Online Analyzer |
| Measurement Principle | Gas-Phase Separation with Colorimetric Detection (Nesslerization-based) |
| Range Options | 0.2–12.0 mg/L NH₄–N |
| Accuracy | ±2.5% of reading or ±0.2 mg/L (whichever is greater, per certified standard solution) |
| Detection Limit | 0.5 mg/L NH₄–N |
| Cycle Time | 13–120 min (user-selectable) |
| Output Signals | 4–20 mA (max. load 500 Ω) |
| Digital Interfaces | RS485 / RS232 with Modbus RTU or PROFIBUS DP protocol support |
| Alarm Outputs | Two programmable relay outputs (24 V DC, 1 A each) |
| Sample Channels | Dual-inlet capability (two independent sample streams) |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Model | MS9000 |
| Instrument Type | Online Water Quality Analyzer |
| Measured Parameters | pH, Dissolved Oxygen (DO), Electrical Conductivity (EC), Turbidity, Permanganate Index (COD<sub>Mn</sub>), Ammonia Nitrogen (NH<sub>3</sub>-N), Total Phosphorus (TP), Total Nitrogen (TN), Temperature |
| Brand | Hach |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Instrument Type | Online Analyzer |
| Measurement Principle | Colorimetric Distillation Method |
| Measurement Range | 0.2–1200 mg/L NH₄–N |
| Accuracy | ≤ ±5% (varies by range |
| Detection Limit | 0.2 mg/L NH₄–N |
| Measurement Interval | User-definable (13 min to 24 h) |
| Batch Capacity | >10 samples per cycle |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Model | TOC600 |
| Instrument Type | Online TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photolysis |
| Measurement Range | 1–1000 ppb C |
| Accuracy | ±2% (10–40 °C), ±5% (40–50 °C) |
| Resolution | 1 ppb C |
| Repeatability | ±1% or ±1 ppb (whichever is greater) |
| Inlet Conductivity Range | 0.05–150 mS/cm |
| Inlet Pressure | 10–100 psig (69–690 kPa) |
| Flow Rate | 60–300 mL/min |
| Output Options | 4–20 mA, RS-232/RS-485 |
| Operating Environment | Ambient ≤70 °C (heat sink required above 70 °C) |
| Brand | HACH |
|---|---|
| Model | SP510 |
| Measurement Principle | Colorimetric (Titanium Yellow Method) |
| Range | 0.3–100 mg/L as CaCO₃ |
| Accuracy | ±10% of setpoint (0.3–2 mg/L), ±4% of setpoint (5–100 mg/L) |
| Cycle Time | ~2 minutes per measurement |
| Alarm Outputs | 1 SPDT relay |
| Power Supply | 115/230 VAC, 50/60 Hz |
| Certifications | UL, CSA, CE |
| Reagent Consumption | Up to 2 months per reagent pack |
| Maintenance Interval | Pump tube replacement every 6 months |
| Calibration | Automatic zero and span calibration supported |
| Compliance | Designed for continuous operation in industrial water treatment environments per ISO 9001-manufactured quality system |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Model | MS8000 Series Online Automatic Water Quality Analyzer |
| Pricing | Upon Request |
Show next