- All
- Favorite
- Popular
- Most rated
| Brand | Sea-Bird Scientific |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Hydro-T |
| Measurement Range | –5 to 45 °C |
| Initial Accuracy | ±0.002 °C |
| Typical Stability | <0.002 °C/year |
| Resolution | 0.0001 °C |
| Clock Accuracy | ±5 seconds/month |
| Battery | Saft LS14500 3.6 V Li-SOCl₂ (hazard-free) |
| Sampling Capacity | 15.9M samples |
| Max Deployment Duration | Up to 2 years (dependent on sampling interval) |
| Housing Material | Engineering-grade polymer |
| Pressure Rating | 1500 m (4900 ft) |
| Weight | 0.2 kg (air), 0.05 kg (water) |
| Calibration | 11-point NIST-traceable calibration in SBE’s ISO/IEC 17025-accredited thermal calibration bath |
| Key | Brand: HACH |
|---|---|
| Model | 9123 |
| Origin | Imported |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Pricing | Available upon Request |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Status | Manufacturer |
| Model | Anatel PAT700 |
| Measurement Range | 0.5–2,000 ppb C TOC |
| Repeatability | ±0.3 ppb or ±1% (whichever is greater) |
| Accuracy | ±1 ppb or ±5% (whichever is greater) |
| TOC Resolution | 0.1 ppb |
| Conductivity/Resistivity Resolution | 0.01 µS/cm or MΩ·cm |
| Temperature Resolution | 0.1 °C |
| Conductivity Compensation | Temperature-compensated and non-temperature-compensated modes |
| Inlet Pressure | 10–100 psig (69–690 kPa) |
| Flow Rate | 60–300 mL/min |
| Analog Outputs | Three 4–20 mA |
| Digital I/O | Two digital inputs, four digital outputs |
| Communication Interfaces | RS232, USB, Ethernet, Serial printer port |
| Brand | Hach |
|---|---|
| Origin | USA |
| Manufacturer | Hach Company |
| Product Type | Imported Instrument |
| Model | HQd Series |
| Pricing | Available Upon Request |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Status | Original Equipment Manufacturer (OEM) |
| Model | 3650EX |
| Power Supply | 2 × AA NiCd or alkaline batteries (2.4–3 V DC) |
| Battery Life | Up to 40 hours continuous operation |
| Measurement Principle | Electrochemical amperometric sensing with proprietary membrane-based sensor |
| Enclosure Rating | IP67 / NEMA 4X |
| Certification | ATEX II 1G Ex ia IIC T4 Ga |
| Temperature Range | –5 °C to +100 °C |
| Output Interface | RS-232 serial digital interface |
| Zero Drift | < 0.5 % FS per 24 h |
| Housing Material | Fully stainless steel (316L) |
| Data Logging | Internal non-volatile memory with PC download capability |
| Brand | Hach |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Model | TitraLab AT1000 |
| Titration Types | Potentiometric (zero-current or controlled-current), Amperometric, Colorimetric |
| Titration Modes | Sample, Blank, Sample + Blank, QC Sample, QC Sample + Blank |
| Measured Parameters | mV/pH, Conductivity, Temperature |
| Resolution | mV/pH: ±0.1 mV / ±0.001 pH |
| Conductivity | ±0.5% of reading |
| Temperature | ±0.3 °C / ±0.51 °F |
| Sample Holder | Integrated design with magnetic stirring |
| max. beaker capacity | 250 mL |
| Electrode Inputs | Dual-channel |
| Burette Capacities | 2.5 / 5 / 10 / 25 mL (ISO 8655-3 compliant) |
| Motor Resolution | 20,000 steps with microstepping (128 μsteps/step) |
| Calibration Modes | Electrode & titrant calibration — automatic, fixed-point, or user-defined (up to 5 points) |
| Calibration Scheduling | Configurable interval-based alerts and reminders |
| Data Storage | Last 100 measurements (samples, blanks, QC samples) + last 10 calibrations, including timestamp, operator ID, sample ID |
| Data Export | USB drive |
| Interface | 5.7" color VGA touchscreen |
| Calibration Curve Display | Direct or derivative plots |
| Connectivity | 2× electrode ports, 2× USB, 1× RS-232, 1× Ethernet |
| Dimensions (H×W×D) | 220 × 400 × 360 mm |
| Weight | 4 kg |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Operating Environment | 15–35 °C, 20–80% RH (non-condensing) |
| Storage Range | −5–40 °C |
| Safety Certification | IEC/EN 61010-1 |
| EMC Compliance | IEC/EN 61326-1 |
| Brand | Trojan |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | TrojanUVSigna |
| Pricing | Available Upon Request |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Model | CA9400 Single-Channel / Dual-Channel Transmitter |
| Pricing | Available Upon Request |
| Brand | HACH |
|---|---|
| Origin | USA |
| Manufacturer | HACH Company |
| Product Type | Imported Instrument |
| Model | Polymetron 9210 |
| Pricing | Upon Request |
| Measurement Range | 0–1000 ppb or 0–5000 ppb SiO₂ |
| Repeatability | ±0.5 ppb / ±2 ppb |
| Detection Limit | <0.5 ppb / <2 ppb |
| Cycle Time | 10 min per channel |
| Operating Pressure | 0.2–2 bar |
| Operating Temperature | 5–50 °C |
| Sample Flow Rate | 15–20 L/h |
| Communication Interface | RS-485 |
| Analog Output | 4–20 mA |
| Channel Capacity | 1–6 channels |
| Calibration | Dual-point (chemical zero & slope) |
| Data Logging | Integrated memory with timestamped records |
| User Interface | Graphical menu with intuitive navigation |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Model | SRCP-20 |
| Certification | IECEx/ATEX Ex ia IICT4 (Cert. No. TC15214) |
| Measurement Range | −2000 to +2000 mV |
| Temperature Display Range | 0–100 °C |
| Output | 2-wire 4–20 mA DC, isolated |
| Power Supply | 17.2–27 V DC |
| Accuracy (Output Linearity) | ±0.6% FS |
| Repeatability | < ±3 mV |
| Environmental Rating | IP65 |
| Operating Temperature | −20 to +55 °C |
| Relative Humidity | < 99% RH |
| Enclosure Material | Die-cast aluminum |
| Weight | 2 kg |
| Mounting | 2″ pipe (60.5 mm O.D.) or wall-mount |
| Cable Entry | 3×NPT |
| Brand | Hach |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Model | FBM-160 / FBM-100A |
| Measurement Range | 0–99.9 mg/L, 0–999 mg/L, 0–9990 mg/L |
| Temperature Output (FBM-160 only) | 0.0–50.0 °C |
| Linearity | ±8% FS (controller) |
| Repeatability | ±5% FS (controller) |
| 90% Response Time | ≤60 s |
| Analog Output | DC 4–20 mA (650 Ω, isolated) |
| Digital Output | RS-232C (optional) |
| Alarm Outputs | 4 configurable |
| Power Supply | AC 90–264 V, 50/60 Hz |
| Environmental Rating | IP65 (FBM-160), IP30 (FBM-100A) |
| Operating Ambient | −20 to +55 °C, ≤95% RH |
| Sample pH Range | 4–9 |
| Sample Temperature | 0–40 °C (non-freezing) |
| Minimum Conductivity | 50 mS/m (500 µS/cm) |
| Flow Rate | 0.01–0.2 m/s |
| Interference Constraints | Avoid high concentrations of Ca²⁺, Al³⁺, Fe³⁺ |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Status | Original Equipment Manufacturer (OEM) |
| Model | HD3600 sc Conductivity Analyzer |
| Pricing | Available upon Request |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Model | SG1000 Series Remote Monitoring Quality Control System |
| Pricing | Available Upon Request |
| Brand | Hach |
|---|---|
| Model | DREL1900 |
| Type | Portable Laboratory System for Field and Lab-Based Water Analysis |
| Core Instrumentation | Integrated Spectrophotometer (with pre-programmed EPA/ISO-compliant methods), Reagent Kits, Calibration Standards, and Modular Accessories |
| Expandable with | Hach HQ40d Multi-Parameter Meter (pH, Conductivity, DO, ORP, TDS, Salinity, Temperature) and 2100Q Portable Turbidimeter |
| Titration Capability | Manual titration module supporting ≥40–100 assays per reagent set (usage-dependent) |
| Compliance | Designed to support EPA Methods 365.3, 365.4, 8080, 8270, ISO 7027, ISO 8274, and APHA Standard Methods 4500-Cl G, 4500-Br G, 4500-I G |
| Configuration Options | DREL1900 General-Purpose, DREL1900 Complete (with HQ40d & turbidimeter), DREL1900 Industrial |
| Brand | HACH |
|---|---|
| Origin | USA |
| Manufacturer | HACH Company |
| Import Status | Imported |
| Model | 9125 |
| Pricing | Upon Request |
| Conductivity Ranges | 0.01–200 µS/cm (with 8310 electrode, k=0.01 cm⁻¹), 0.1–2 mS/cm (with 8311 electrode, k=0.1 cm⁻¹), 1–20 mS/cm (with 8312 electrode, k=1 cm⁻¹) |
| Accuracy | ±1% of reading (conductivity/resistivity), ±0.4 °C (temperature) |
| Temperature Range Display | −20 to 200 °C |
| Temperature Compensation | Automatic nonlinear compensation optimized for ultrapure water |
| Sensor Compatibility | Two-electrode contact-type (8310/8311/8312) and inductive (toroidal) probes |
| Diagnostic Capability | Built-in self-check for two-electrode sensors |
| Output Options | 4–20 mA analog output (isolated), RS-485, Profibus DP, Modbus RTU (JBUS), optional 4 relay outputs |
| Enclosure Rating | IP66/NEMA 4X |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Model | COSMOS-25 |
| Turbidity Measurement Principle | Dual-channel 90° scattered light (DIN/EN 27027 & ISO 7027 compliant, 860 nm) + 8-angle multi-angle scattering verification |
| SS Measurement Principle | Enhanced multi-angle absorbance (8-channel, 860 nm) |
| Turbidity Range | 0.001–10,000 NTU |
| Turbidity Resolution | 0.001 NTU (0–0.999 FNU), 0.01 NTU (1–9.99 FNU), 0.1 NTU (10–99.9 FNU), 1 NTU (>100 FNU) |
| Turbidity Accuracy | < ±3% of reading |
| Turbidity Repeatability | < ±4% of reading |
| SS Range | ≥0.001 g/L (upper limit medium-dependent |
| SS Resolution | 0.001 g/L (0–0.999 g/L), 0.01 g/L (1–9.99 g/L), 0.1 g/L (10–99.9 g/L), 1 g/L (>100 g/L) |
| SS Accuracy | Medium- and calibration-dependent |
| SS Repeatability | Dependent on sample homogeneity |
| Cleaning | Integrated mechanical self-positioning wiper |
| Signal Transmission | Long-distance analog/digital output without intermediate transmitter |
| Architecture | Modular, field-expandable design |
| Brand | HACH |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Polymentron 8350SC |
| Pricing | Available Upon Request |
| Brand | HACH |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | Polymentron 8362SC |
| Pricing | Upon Request |
| Brand | HACH |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | Polymentron 8398SC |
| Pricing | Available Upon Request |
| Brand | Sea-Bird Scientific |
|---|---|
| Manufacturer Origin | USA |
| Model | WQMX |
| Sensor Integration | CTD + FLNTU + DO + CDOM + Optional PAR/Phycocyanin/Phycoerythrin/pH |
| Depth Rating | 200 m |
| Power Input | 9–16 V DC |
| Communication | RS-232 |
| Sampling Rate | 1 Hz |
| Weight (air/water) | 6.25 kg / 1.7 kg |
| Biofouling Resistance | 3–6 months continuous deployment |
| Compliance | ASTM D888, ISO 5814, USP <643>, EPA Method 4500-O, GLP/GMP-ready data logging |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer | DKK Toa (Japan), Distributed by HACH |
| Model Series | GSS-304A/B/F, GSS-314A/B/F, PSS-304B, PSS-314B, ASS-304B, ASS-314B |
| Sensor Type | Replaceable pH/ORP/Conductivity Electrodes with Non-refillable or Refillable KCl Reference Systems |
| Body Material | Polyphenylene Sulfide (PPS/Ryton®) |
| Operating Temperature Range | 5–100 °C (model-dependent) |
| Max Pressure Rating | 0.2–0.5 MPa |
| Minimum Conductivity for Stable pH Measurement | 100–1000 µS/cm |
| Electrode Mounting Options | Immersion, Insertion (Pipe), Flow-Through, Ultrasonic/Chemical/Pneumatic Cleaning Compatible |
| Compliance | Designed for continuous industrial water and wastewater monitoring per ISO 5667, ASTM D1293, USP <791>, and GLP/GMP-aligned operational traceability |
Show next